54
EXT SETTING
3
Press the
ë
buttons to choose a name.
Then press the
3
button.
The LIST disappears and the name is assigned to the
EXT terminal.
To erase a name assigned to the EXT terminal:
Choose a blank space.
4
Press the
3
button to complete the
setting.
The menu disappears.
•
You cannot choose an EXT terminal name that is not
on the name list (LIST).
■
■
■
■
'8%%,1*
'8%%,1*
'8%%,1*
'8%%,1*
You can choose a signal source to be output from the EXT-2
terminal.
You can do this with the output signal of the device connected
to another EXT terminal, or the picture and sound from a TV
channel you are currently viewing.
1
Press the
ì
buttons to choose the EXT-2
terminal.
2
Press the
ë
buttons to choose another
EXT terminal or TV.
The arrow in the menu represents a signal flow. The left
side of the arrow shows a signal source output from the
EXT-2 terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected to an EXT
terminal passes through the TV and is output from the
EXT-2 terminal.
TV:
The picture and sound of the TV channel you are
currently viewing are output from the EXT-2 terminal.
3
Press the
3
button to complete the
setting.
The menu disappears.
•
During dubbing, you cannot turn off the TV. Turning
off the TV also turns off the output from the EXT-2
terminal.
•
When you choose an EXT terminal as an output, you
can view a TV programme or a picture from the other
EXT terminal while dubbing the picture from a
device connected to the EXT terminal onto a VCR
connected to the EXT-2 terminal.
•
The RGB signals from TV games cannot be
output.Teletext programmes cannot be output.
WFT1EK_E2.fm Page 21 Wednesday, January 17, 2001 9:30 AM
