No. 51952
AV28CT1EKS / AV28CT1EKB
AV28CT1EPS / AV28CT1EPB
AV28CT1EIS
21
Item
Measuring
instrument
Test point
Ad justment part
Description
Ad justment
of WHITE
BALANCE
(High Lig ht)
Signal
generator
Remote
control unit
2.DRIVE
(R)
＊＊＊
(B)
＊＊＊
"
The adjustment for Low Light WHITE BALANCE should be
finished.
"
Set the PICTURE MODE to NORMAL.
1. Receive a black and white signal (colour off).
2. Select 2.V/C from the SERVICE MENU.
3. Select 2.DRIVE with the FUNCTION UP/DOWN key.
4. Change the sc reen colour to white with 4 key or 7 key (Drive of
Red), 6 key or 9 key (Drive of Blue).
5. Press the MENU key, and memorize the set values.
Ad justment
of
SUB BRIGHT
Remote
control unit
3.BRIGHT
1. Receive any broadc ast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 3.BRIGHT with the FUNCTION UP/DOWN key.
4. Set the initial setting value with the FUNCTION -/+ key.
5. If the brightness is not the best with the initial setting value,
make fine adjustment until you get the bes t brightness.
6. Press the MENU key and memoriz e the s et value.
Ad justment
of
SUB
CONTRAST
Remote
control unit
4.CONT.
1. Receive any broadc ast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 4.CONT with the FUNCTION UP/DOWN key.
4. Set the initial setting value with the FUNCTION -/+ key.
5. If the contrast is not the best with the initial setting value, make
fine adjustment until you get the best contras t.
6. Press the MENU key and memoriz e the s et value.
REMOTE CONTROL UNIT
1
2
3
4
5
7
8
6
9
▼
▲
▼
▲
DRIVE
(R)
DRIVE
(R)
DRIVE
(B)
DRIVE
(B)
