Using the TV’s menu
19
PICTURE SETTING
TINT
You can select one of three TINT modes
(three kinds of picture settings) to adjust the
picture settings automatically.
COOL:
A cool white colour base with a boost in the
colour and contrast levels that creates a more
vivid picture.
WARM:
A warm orange/red colour base that creates
the appropriate colour and contrast levels for
watching films.
NORMAL:
A normal white colour base with normal
colour and contrast levels.
Picture Adjustment
You can change the picture settings of each
TINT mode as you like.
CONTRAST
You can adjust the picture contrast.
2
: lower
3
: higher
BRIGHT
You can adjust the picture brightness.
2
: darker
3
: brighter
SHARP
You can adjust the picture sharpness.
2
: softer
3
: sharper
COLOUR
You can adjust the picture colour.
2
: lighter
3
: deeper
HUE
You can adjust the picture tint.
2
: reddish
3
: greenish
• You can change the HUE setting (picture
hue) only when the colour system is
NTSC 3.58 or NTSC 4.43. (See
“Specifications” on page 38.)
To return to the default settings in
each TINT mode:
Press the blue button.
• This returns the picture settings in the
TINT mode you have chosen to the
default settings, and stores them in the
TINT mode.
PICTURE FEATURES
DIGITAL VNR
The DIGITAL VNR function cuts down the
amount of ‘noise’ (‘snow’ or interference) in
the original picture.
You can choose from the three DIGITAL
VNR function settings of AUTO, MIN and
MAX.
AUTO:
The TV will automatically adjust the level of
the DIGITAL VNR effect to match the
amount of noise in the picture, giving you the
best possible picture.
• If you set the DIGITAL VNR effect too
high it can make the picture less sharp. It
is recommended to use the AUTO setting
if you can.
TINT
CONTRAST
BRIGHT
SHARP
COLOUR
HUE
NORMAL
BACK
PICTURE SETTING
TV
OK
D0014-EK
RESET
D1015-EK
DIGITAL VNR
DigiPure Pro
COLOUR SYSTEM
4:3 AUTO ASPECT
PICTIRE TILT
AUTO
AUTO
BACK
PICTURE FEATURES
TV
OK
AV32&28X25EKS&EIS.fm Page 19 Friday, April 12, 2002 1:38 PM
