D-86
Setup Menu
Bildschirmmenü DISC MENU
In der folgenden Tabelle finden Sie die Bezeichnung und Beschreibung der Parameter, die im Bildschirmmenü DISC MENU
eingestellt werden können.
Obere Hälfte : Anzeige auf dem Bildschirm
Untere Hälfte : Anzeige auf der LCD-Anzeige
[ ]
: Standardeinstellung
Parameter
Mögliche Einstellungen
Beschreibung
FINALIZE
[CANCEL]
EXECUTE
FINAL
[CAN]
EXE
CANCEL DISC
[CANCEL]
FINALIZATION
EXECUTE
CAN FIN
[CAN]
EXE
DISC ERASE
[CANCEL]
(QUICK)
EXECUTE
q ERASE
[CAN]
EXE
DISC ERASE
[CANCEL]
(FULL)
EXECUTE
F ERASE
[CAN]
EXE
MENU
Dieser Parameter zeigt an, ob die beschriebene Disc finalisiert werden soll oder nicht.
Wenn die Disc mit diesem DVD-Recorder aufgenommen wurde und auf einem anderen
DVD-Player abgespielt werden soll, muss sie zuerst finalisiert werden. Nachdem das
Finalisieren ausgeführt wurde, können Sie keine weiteren Daten auf die Disc schreiben.
CANCEL
: Die Disc soll nicht finalisiert werden.
EXECUTE
: Die Disc soll finalisiert werden.
Vor dem Finalisieren müssen alle Titel auf der Disc abgeschlossen sein.
* Es dauert höchstens 20 Minuten, bis das Finalisieren beendet ist.
Wählen Sie aus, ob Sie die Finalisierung einer finalisierten DVD-RW rückgängig
machen möchten. Wenn Sie eine weitere Aufnahme zu einer finalisierten DVD-RW
hinzufügen möchten, wählen Sie die Einstellung EXECUTE. Bei auf anderen Geräten
finalisierten DVD-RWs kann die Finalisierung nicht rückgängig gemacht werden.
CANCEL
: Die Finalisierung wird nicht rückgängig gemacht.
EXECUTE
: Die Finalisierung wird rückgängig gemacht. Das bei der Finalisierung
erstellte TOP MENU wird gelöscht.
Wählen Sie aus, ob Sie die Schnelllöschfunktion auf eine DVD-RW (Videomodus)
anwenden möchten. Bei einer Schnelllöschung wird lediglich der Disc-Steuerbereich
gelöscht. Verglichen mit dem vollständigen Löschen geht dieses Verfahren zum
Löschen der Disc-Daten schneller.
CANCEL
: Es wird keine Schnelllöschfunktion ausgeführt.
EXECUTE
: Es wird eine Schnelllöschfunktion ausgeführt. Die Disc kann von
Anfang an neu aufgenommen werden.
Wählen Sie aus, ob Sie eine DVD-RW (Videomodus) vollständig löschen möchten.
Sämtliche Bereiche einer DVD-RW werden gelöscht. Wenn eine Disc wiederholt
verwendet werden soll, führen Sie den Löschvorgang über diesen Menüpunkt durch.
CANCEL
: Es wird kein vollständiges Löschen ausgeführt.
EXECUTE
: Es wird ein vollständiger Löschvorgang ausgeführt. Die Disc kann von
Anfang an neu aufgenommen werden.
Mit dieser Taste kehren Sie zum Setup Menu zurück.
Bildschirmmenü INPUT SELECT MENU
In der folgenden Tabelle finden Sie die Bezeichnung und Beschreibung der Parameter, die im Bildschirmmenü INPUT SELECT
MENU eingestellt werden können.
Obere Hälfte : Anzeige auf dem Bildschirm
Untere Hälfte : Anzeige auf der LCD-Anzeige
[ ]
: Standardeinstellung
Parameter
Mögliche Einstellungen
Beschreibung
INPUT SELECT
[LINE]
Y/C
DV
INPUT
[LINE]
YC
dV
MENU
Mit diesem Parameter wählen Sie die Audio- und Video-Eingangssignale aus.
LINE
: Das Composite-Video-Signal des Anschlusses VIDEO LINE IN und das
analoge Audiosignal des Anschlusses AUDIO IN sollen verwendet werden.
Y/C
: Das separate Y/C-Signal des Anschlusses Y/C IN und das analoge
Audiosignal des Anschlusses AUDIO IN sollen verwendet werden.
DV
: Die digitalen Audio- und Videosignale des Anschlusses DV IN/OUT sollen
verwendet werden.
* Die Leuchtanzeige für das ausgewählte Eingangssignals an der Vorderseite des
Geräts leuchtet auf oder beginnt zu blinken.
Sie können keine Einstellungen für diesen Parameter vornehmen, wenn Sie im
Bildschirmmenü REMOTE MENU im Menüpunkt REMOTE SELECT die Option DV
(MASTER), DV (SLAVE) oder DV (TRIGGER) gewählt haben. In diesem Fall werden
DV-Signale als Eingangssignale gewählt.
Mit dieser Taste kehren Sie zum Setup Menu zurück.