55
Recording
Erasing the Last Title
Only the last title of an unfinalized disc that is recorded using this unit will be erased.
Disc Repair Feature
When the power supply is cut off during recording or other operations on this unit, there is a feature to repair the disc.
After the power supply is cut off during recording or other operations, the disc repair (RESTORE) will automatically start when the
power is supplied again.
CAUTIONS
•
Do not switch off or plug out the power cord during disc repair.
•
The repair might not be possible depending on the disc.
1.
Insert the DVD-R/DVD-RW/DVD+R/DVD+RW.
2.
Press the SET UP button to display the Setup Menu.
3.
Use the
h
and
g
buttons to select DISC item and then press the SET
button.
•
The DISC menu screen will appear.
4.
Press the
h
and
g
button, select either the LAST TITLE ERASE item,
then press the SET button.
•
The setting value list box is displayed.
5.
Use the
h
and
g
buttons to select EXECUTE from the list and then
press the SET button.
•
The last title will be erased.
Note
In the case of DVD-R/DVD+R, erasing a title will not create more disc space.
CAUTION
Under no circumstances should the power be turned off or the power cord dis-
connected while data is being erased.
MENU
FINALIZE
CANCEL
CANCEL
CANCEL
CANCEL DISC FINALIZATION
OFF
AUTO FINALIZE
OFF
AUTO CANCEL DISC FINALIZ.
EXECUTE
DISC ERASE
DISC ERASE
CANCEL
LAST TITLE ERASE
DISC MENU
( QUICK )
( FULL )
DISC MENU screen
