28
English
4
Set the on-time you want the unit to
turn on.
1) Press
4
;
or
¢
;
to set the hour, then
press SET
k
.
2) Press
4
;
or
¢
;
to set the minute, then
press SET
k
.
“OFF TIME” appears for 2 seconds, then the unit
enters off-time setting mode.
5
Set the off-time you want the unit to
turn off (on standby).
1) Press
4
;
or
¢
;
to set the hour, then
press SET
k
.
2) Press
4
;
or
¢
;
to set the minute, then
press SET
k
.
The unit enters preset station selecting mode.
6
Select the preset station.
1) Press
4
;
or
¢
;
to select the band
(“TUNER FM” or “TUNER AM”), then press
SET
k
.
2) Press
4
;
or
¢
;
to select a preset channel
number, then press SET
k
.
The REC indicator stops flashing and remains
lit. The settings you have done are shown on the
display in sequence.
7
Press
2
,
@
to turn off the unit (on
standby) if necessary.
If you want to listen to another source while
recording
Press REC START/STOP
s
to stop recording. Without stopping it,
you cannot change the source.
To turn on or off Recording Timer after its setting
is done
1. Press TIMER/CLOCK
h
repeatedly until “REC”
appears on the display.
2. To turn off the Recording Timer, press CANCEL
/
.
The REC indicator goes off from the display.
The Recording Timer is cancelled, but the setting for
the Recording Timer remains in memory.
To turn on the Recording Timer, press SET
k
.
The REC indicator lights up on the display.
The settings you have done are shown on the display in
sequence for your confirmation.
PRESET
PREV
NEXT
SET
SEA CONTROL
PRESET
PREV
NEXT
SET
SEA CONTROL
PRESET
PREV
NEXT
SET
SEA CONTROL
STANDBY
TIMER
/CLOCK
CANCEL
DEMO
SET
SEA CONTROL
Using Sleep Timer
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time length passes.
On the remote control
On the remote control
ONLY
::
1
Press SLEEP
#
.
The time length until the shut-off time appears and
the SLEEP indicator starts flashing on the display.
• Each time you press the button, the time length changes as
follows:
SLEEP
10
Cancelled
20
30
60
90
120
2
Wait for about 5 seconds after specifying the time
length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time,
press
SLEEP
#
once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time,
press SLEEP
#
repeatedly until
the desired time length appears on the display.
To cancel the setting,
press SLEEP
#
repeatedly so that the
SLEEP indicator goes off.
• Sleep Timer is also cancelled when you turn off the unit.
Timer Priority
Since each timer can be set separately, you may wonder what happens
if the setting for these timers overlaps.
Here are examples.
•
Recording Timer has priority over Daily Timer and Sleep
Timer.
If Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
Recording Timer
6:00
7:30
7:00
6:30
Daily Timer
If Recording Timer is set to come on while Sleep Timer is
operating, Sleep Timer will not work (the SLEEP indicator does
not go off).
Recording Timer
7:00
6:30
Sleep Timer
7:30
6:00
does not work.
does not work.
EN26-33;MX-J777V/PM6
7/8/99, 9:15 AM
28
