– 42 –
3
Push the joy control downward (
1
) or upward
(
¡
) to select “MOVE,” then press SET.
4
Push the joy control downward (
1
) or upward
(
¡
) to select the track you want to move.
5
Press SET.
• If you have selected a wrong track number, press
CANCEL, then select the correct track number.
6
Push the joy control downward (
1
) or upward
(
¡
) to select the position where you want to
move the track.
7
Press SET.
• If you have selected wrong tracks, press CANCEL,
then select the correct tracks by repeating from step
4.
Ex. When you want to move track 3
Ex. When you want to move to the track 5 position
8
Press ENTER/DEMO to finish the editing
procedure.
9
Press
0
for the MD recorder to eject the MD.
“WRITING” appears while the editing you have made
is being recorded on the MD.
ERASE Function
This function allows you to erase an unwanted track.
• To stop any time during editing process, press EDIT.
On the unit ONLY:
1
Insert an MD you want to edit into the MD loading
slot.
2
Press EDIT.
The source is changed to “MD,” and the MD recorder
enters editing mode (with DIVIDE function selected).
3
Push the joy control downward (
1
) or upward
(
¡
) to select “ERASE,” then press SET.
Continued
EN38-43.CA-MXS5RMD[B]/f
99.9.14, 1:54 AM
42
