– 53 –
4
Push the joy control rightward (
¢
) or leftward
(
4
) to set the hour of the timer-off time, then
press SET.
5
Push the joy control rightward (
¢
) or leftward
(
4
) to set the minute of the timer-off time, then
press SET.
6
Push the joy control rightward (
¢
) or leftward
(
4
) to select the source.
• The source changes as follows:
– – – – – – : Plays the source selected when the unit is
turned off.
FM – – :
Tunes into an FM station.
=
go to step 7 to select a preset station.
AM – – :
Tunes into an AM (MW/LW) station.
=
go to step 7 to select a preset station.
CD – :
Plays a CD.
=
Prepare a CD, then go to step 7 to
select the CD and starting track.
MD – – – : Plays an MD.
=
Prepare an MD, then go to step 7 to
select the starting track.
TAPE*:
Selects “TAPE” as the source.
=
Make the external equipment ready for
playback.
AUX DIGITAL*: Selects “AUX DIGITAL” as the
source.
=
Make the external digital equipment
ready for playback.
* To operate these equipment with the Daily Timer,
they also need to have the timer function.
7
If you have selected “FM – – ” or “ AM – –” as the
source in the above step, select a preset station.
Push the joy control downward (
1
) or upward
(
¡
) to select a preset station, then press SET.
• If you press SET without selecting a preset station,
the last received station will be tuned in when the
unit is turn on with the Daily Timer.
FM – –
– – – – – –
AM – –
TAPE
MD – – –
CD –
AUX DIGITAL
If you have selected “CD –” as the source in the
above step, select a disc number.
1) Push the joy control downward (
1
) or upward
(
¡
) to select the disc number (CD 1 to CD 3),
then press SET.
2) Push the joy control downward (
1
) or upward
(
¡
) to select a track number, then press SET.
• If you press SET without selecting a disc number,
the last selected disc will be played back when the
unit is turn on with the Daily Timer.
• If you press SET without selecting a track number,
playback starts from the first track of the selected
disc when the unit is turn on with the Daily Timer.
If you have selected “MD – – –” as the source in the
above step, select a track number.
Push the joy control downward (
1
) or upward
(
¡
) to select a track number, then press SET.
• If you press SET without selecting a track number,
the first track starts playing when the unit is turn
on with the Daily Timer.
If you have selected “TAPE” or “AUX DIGITAL” as
the source in the above step, simply press SET.
8
Push the joy control rightward (
¢
) or leftward
(
4
) to adjust the volume level.
• You can adjust the volume level within the range of 0
(silent) to 50 (maximum).
• “– –” can be selected if you set the timer while the
unit is turned on. The volume is set to the current
volume level.
9
Push the joy control downward (
1
) or upward
(
¡
) to select volume fade-in mode — “FADE”
or “NoFADE.”
FADE :
Volume fades in (gradually becomes
louder and is set to the specified level).
NoFADE : No fade-in effect. Volume is set to the
specified level when the timer-on time
comes.
10
Press SET.
The DAILY indicator stops flashing and remains lit.
11
Press
to turn off the unit (on standby) if you
have set the timer with the unit turned on.
The STANDBY/ON lamp lights red.
EN50-54.CA-MXS5RMD[B]/f
99.9.14, 1:55 AM
53
