– 26 –
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4.
• To program tracks from a different disc, repeat steps
3 and 4.
6
Press CD
3
/
8
.
The tracks are played in the order you have programed.
Program Play stops when all the programed tracks are
played (unless Repeat Play is activated—see page 27).
To stop during play, press
7
.
To exit from Program Play mode, before or after play,
press FM/PLAY MODE once or twice so that the unit
enters another playback mode (Random Play or Continuous
Play).
To check the program contents
Before playing, you can check the program contents by
pressing
¡
/
¢
or
4
/
1
on the remote control.
•
¡
/
¢
: Shows the programed tracks in the
programed order.
•
4
/
1
: Shows them in the reverse order.
To modify the program
Before playing, you can erase the last programed track by
pressing CANCEL.
Each time you press the button, the last programed track is
erased from the program.
• When you eject a disc, the tracks selected from that
ejected disc are also erased from the program.
• Turning off the unit also erases the entire program.
To add tracks to the program before playing, simply
select disc numbers and track numbers you want to add.
If you try to program a 33rd step
“MEMORY FULL” will appear in the main display.
If your entry is ignored
You have tried to program a track from an empty tray, or a track
number that does not exist on the disc (for example, selecting track
14 on a disc that only has 12 tracks). Such entries are ignored.
Playing at Random—Random Play
The tracks of all loaded discs will play at random.
On the remote control ONLY:
1
Load discs into 3-CD Changer.
• If the current playing source is not 3-CD Changer,
press CD
3
/
8
, then
7
before going to the next step.
2
Press FM/PLAY MODE repeatedly so that “CD
RANDOM” appears in the main display.
The RANDOM indicator also lights on the display.
• Each time you press the button, play mode changes
as follows:
3
Press CD
3
/
8
.
The tracks are played at random.
Random Play stops when all the tracks are played once
(unless Repeat Play is activated—see page 27).
To stop during play, press
7
.
• Random Play also stops when you open a disc tray.
To exit from Random Play mode, before or after play,
press FM/PLAY MODE once or twice so that the unit
enters another playback mode (Continuous Play or
Program Play).
• Pressing CD1, CD2, or CD3 starts Continuous Play from
the first track of the selected disc.
• Pressing one of the number buttons will start Continuous
Play from the selected track of the currently selected
disc.
RANDOM
NORMAL
SPEED
dB
REC LEVEL
3
2
1
CD
Continued
Program Play
(CD PROGRAM)
Random Play
(CD RANDOM)
Continuous Play
EN23-28_CA-NXCDR7R[B]_f
01.7.23, 10:00 AM
26
