– 37 –
■
Using the REC MODE button
On the unit ONLY:
1
Prepare discs in 3-CD Changer.
• If the current playing source is not 3-CD changer,
press CD
3
/
8
, then
7
. To select a disc, press DISC
repeatedly, then
7
.
You can also use the remote control. When using it,
press CD1, CD2, or CD3, then
7
.
You can make a program (see page 25) if you
want. (But you cannot select Random Play.)
2
Insert a recordable CD-R or CD-RW on the CDR
disc tray.
3
Press REC SPEED (inside the sliding panel) if
necessary.
• Each time you press the button, recording speed
alternates between normal speed and high speed*.
* For CD-R, 4 times normal speed; for CD-RW, 2 times
normal speed.
When high speed is selected, recording input level is reset
to “0” temporarily, and will not affect the recording.
4
Press REC MODE (inside the sliding panel) to select
“CD REC?” or “CD REC & FINALIZE ?”
• Each time you press the button, recording modes
change as follows:
• CD REC ?: Select this to perform CD Direct
Recording.
• CD REC & FINALIZE ?: Select this to
automatically finalize the disc after recording.
CD-RW
UNFINALIZE DISC
AUTO TRACK
HIGH SPEED
dB
REC LEVEL
CD-RW
UNFINALIZE DISC
NORMAL
AUTO TRACK
SPEED
dB
REC LEVEL
Remaining time of the
currently playing track
Remaining time in the
CD-R/CD-RW
5
Press REC START (inside the sliding panel).
• If OPC (see page 32) is being performed, “UPDATE
OPC” flashes first in the main display, then recording
starts.
Recording stops when a selected disc (or a program) is
recorded.
• Both 3-CD Changer and CD Recorder stop
automatically.
To confirm the recording contents, see “To change the
display information while recording” on page 35.
To stop recording, press
7
. “STOP DUBBING” flashes
for a while. (In this case, the disc will not be finalized even
if you have selected “CD REC & FINALIZE ?” in step 4.)
• Both 3-CD Changer and CD Recorder stop
automatically.
To remove the recorded disc, press
0
CDR.
“FINALIZE ?” flashes in the main display for a while if
you have selected “CD REC?” in step 4.
• If you do finalize the disc, press FINALIZE.
Remember once you finalize a CD-R, no further
recording can be made on the disc. (For more details, see
“Finalizing a Disc—CD-R/CD-RW” on page 41.)
• If you do not finalize the disc, press
0
CDR again.
If “SHORT REM. OK ?” appears when you press
REC START
There is not enough remaining time left on the recordable disc.
Eject and change a disc or press REC START one more time to
start recording anyway (the entire source disc cannot be recorded
in this case).
During CD Direct Recording
Repeat Play will be canceled automatically.
CD-RW
UNFINALIZE DISC
NORMAL
AUTO TRACK
SPEED
dB
REC LEVEL
3
2
1
CD
CDR
CD REC?
=
1st Tr. REC?
=
SET
=
LISTENING?
=
Canceled
=
(Goes back to the beginning)
CD REC & FINALIZE?
=
SET
=
LISTENING & FINALIZE?
=
3
2
1
CD
CD-RW
UNFINALIZE DISC
NORMAL
AUTO TRACK
SPEED
dB
REC LEVEL
REC
3
2
1
CD
CD-RW
UNFINALIZE DISC
NORMAL
AUTO TRACK
SPEED
REC LEVEL
DIGITAL
REC
EN31-41_CA-NXCDR7R[B]_f
01.7.23, 10:01 AM
37
