15
Playing Back from USB mass storage class device
This System is equipped with a USB MEMORY terminal on the front panel. You can connect a
USB mass storage class device such as a USB flash memory device, Digital Audio Player (DAP),
etc. to this System.
This System cannot recognize a USB mass storage class device whose rating exceeds 5V/500mA.
To connect the USB mass storage class device
When connecting a USB mass storage class device, refer also to its manual.
• When disconnecting the USB mass storage class device, make sure that the System is in the stop condition.
Basic Operations
For MP3/WMA playback
Button
Function
On the Unit
On the remote
Starts playback / Pauses
Stops playback
Increases the track numbers.
Press and hold : Fast forward search
Decreases the track numbers.
Press and hold : Fast reverse search
(Press this button during playback to jump back to the beginning of
the track.)
1
Set Number select mode.
2
Input the Group number, then
input the Track number.
STANDBY
FUNCTION
AUX
PHONES
USB
MEMORY
DAP
or
or
Track number
Group number
NX-PS1[C].BOOK Page 15 Tuesday, October 31, 2006 5:46 PM
