– 16 –
English
You can play back only type I (Normal) tapes.
Playing Back a Tape
1
Press STOP/EJECT
7
/
0
for the deck you
want to use.
2
Put a cassette in, with the exposed part of the
tape down.
3
Close the cassette holder gently.
4
Press TAPE.
5
Press PLAY
3
.
The tape play starts.
When the tape plays to the end, the deck
automatically stops.
To stop during play,
press STOP/EJECT
7
/
0
.
To operate the other deck,
press STOP/EJECT
7
/
0
, then
PLAY
3
on the other deck.
To fast wind to the left or to the right,
press REW
1
/
FF
¡
while the tape is not running.
To remove the cassette,
press STOP/EJECT
7
/
0
.
To play the tapes in the decks B and A continuously
1
Set the cassette tapes in the decks A and B.
• If the tape direction is set wrong, replace the cassette.
2
Press PLAY
3
for the deck B.
The tape in the deck B begins to play.
3
Press PAUSE
8
, then press PLAY
3
for the
deck A.
When the tape in the deck B ends, the tape in the deck A
automatically begins to play.
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
TAPE
Playing Back Tapes
PAUSE
For Deck A
For Deck B
EN13-16_PC-X290[C]_f.p65
04.3.10, 1:35 PM
16
