1-10 (No.MB729<Rev.004>)
(3) Disconnect the connector wire from CD board connected to
connector of the Loader board. (See Fig.9)
(4) Disconnect the connector wire from CD board connected to
connector of Traverse mechanism. (See Fig.9)
Fig.9
(5) Solder the solder short part of the pickup. (See Fig.10)
Fig.10
(6) Disconnect the card wire from CD mechanism connected
to connector
CN102
of the CD board. (See Fig.11)
Fig.11
3.1.5 Removing the Front panel (See Fig.12, 13, 14)
(1) Remove the two screws
J
attaching the Front panel. (See
Fig.12)
Fig.12
(2) Disengage two hooks
b
engaged both side of the Front
panel. (See Fig.13)
Fig.13
(3) Disconnect the connector wire from USB board connected
to connector
CN114
of the CD board. (See Fig.14)
Fig.14
3.1.6 Removing the CD board (See Fig.15)
(1) Remove the four screws
K
attaching the CD board.
Fig.15
connector of
loader board
connector of
traverse mechanism
solder short part
CN102
J
hook
b
CN114
K
K
Summary of Contents for CA-UXG375
Page 25: ...3 13 MEMO ...
Page 66: ... M E M O ...
