background image

 

9

 

To select a track

To select a group (MP3 only)

 

1

 

While disc play is stopped, activate the group select 
mode.

 

2

 

Select a group number.

 

Group number and group name appear.

 

To locate a particular portion

 

While playing a disc, press and hold until the portion you 
want is reached.

 

To locate a track directly

 

1

 

Activate the track number entry mode.

 

2

 

Enter a track number you want to play back.

To select track numbers on an MP3 disc,

 

 enter the 

number in three digits. Refer to the following examples:
When selecting track 24...

1

 

Press SET to skip the first digit.

2

 

Select “2” for the second digit pressing UP or DOWN 
button repeatedly, then press SET.

3

 

Select “4” for the last digit pressing UP or DOWN 
button repeatedly, then press SET or CD 

6

 

.

If you enter a track number that does not exist on the MP3 
disc...
• During playback, your entry will be ignored and 

playback will continue with the current track.

• While playback is stopped, disc playback will remain at 

the first track in the first group until you press CD 

6

 

then playback will start.

• To go back a step, press CANCEL.

 

Playing Back a Portable Audio Device

 

By using QP Link (Quick Portable Link), you can easily start 
playing back a portable audio device connected to the AUX 
jack.
• Make sure to set the volume of your portable audio device 

loud enough so that the System can detect the sound signal.

 

To activate QP Link

 

When QP Link is activated, connecting a portable device to 
the AUX jack and starting playback performs the following:
• While listening to another source...

Changes the source to AUX automatically. (If you change 
from AUX to another source, QP Link will be canceled.)

• While the System is on standby...

Turns on the System and activates the AUX source 
automatically (except when the display is turned off).

While QP Link plays back the device...

Decreases the track numbers.

Increases the track numbers.

PTY SEARCH

QP Link

S.TURBO

MP

3

QP Link

S.TURBO

MP

3

Track select 
mode

Group select 
mode

Decreases the group numbers.

Increases the group numbers.

Remote
ONLY

DOWN

PRESET/GROUP/PTY

UP

Fast-forwards the track.

Fast-reverses the track.

Remote
ONLY

NUMBER

SELECT

QP Link

S.TURBO

QP Link

S.TURBO

MP

3

• For regular CDs

• For MP3 discs

SET 

ANT. P.

DOWN

PRESET/GROUP/PTY

UP

Increases the 
numbers.

Decreases the 
numbers.

Remote
ONLY

QP LINK

QPL OFF

QPL ON

(Initial setting)

QP Link

S.TURBO

Bubbles appear when 
QP Link works. 

QP Link

S.TURBO

Bubbles disappear when the 
sound signal stops or is too 
weak.

UX_GB9.book Page 9 Thursday, May 18, 2006 4:18 PM

Summary of Contents for CA-UXGB9DAB





























Reviews: