(No.49787B)1-11
3.2.7 Lifter unit
(See Fig.8 and 9)
(1) Unhook the elevator spring located on the front side of the
unit. (Be sure to first unhook the spring from the lifter side
as shown in the upper part of the diagram.)
(2) Lift the lifter unit upward, then remove the lower rod to re-
move the lifter unit from the chassis.
Fig.8
Fig.9
3.2.8 Lifter bracket
(See Fig.10)
(1) Remove the two lifter bracket fixing screws
L
located on
the back of the lifter unit.
(2) Remove the lower rod.
Fig.10
3.2.9 Side bracket and traverse mechanism assembly
(See Fig.11)
(1) Remove the two side bracket unit fixing screws
M
to dis-
connect the side bracket unit from the lifter unit.
(2) Remove the three shafts on the traverse mechanism as-
sembly from the lifter unit.
CAUTION:
For reassembling, refer to the reassembling procedures.
Fig.11
Unhook this part first
Proper
orientation
Spring
Lift up the lifter unit
Lower rod
Lifter unit
L
L
Lifter bracket
Remove from the lifter unit
Remove from the
lifter unit
M
M
Lifter unit
Side bracket
Traverse mechanism
assembly
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
