JVC Connected Cam GY-HC500E Instructions Manual Download

Page: 135 / 268

Audio Set Item

Input1 Mic Ref.

For setting the reference input level when the

[INPUT1] selection switch is set to “MIC” or “MIC

+48V”.

[Setting Values: -62dB, -56dB,

-50dB, -44dB,

-38dB, -32dB]

Input2 Mic Ref.

For setting the reference input level when the

[INPUT2] selection switch is set to “MIC” or “MIC

+48V”.

[Setting Values: -62dB, -56dB,

-50dB, -44dB,

-38dB, -32dB]

Int. Mic Gain

For setting the sensitivity of the built-in microphone.

[Setting Values: 12 dB, 6 dB,

0dB]

AUX Gain

For setting the sensitivity of the [AUX] terminal

input.

[Setting Values: 12 dB, 6 dB,

0dB]

Ref. Level

For setting the recording reference level. (Applies

to both [CH1/CH2].)

[Setting Values: -12dB, -18dB,

-20dB]

Limiter

For setting the limiter operation.

-9dBFS:

Sets “-9dBFS” to the maximum recording level.

-6dBFS:

Sets “-6dBFS” to the maximum recording level.

Off:

Depending on the settings of the [CH1/CH2

AUTO/MANUAL] selection switches, the

operation may be different as described below.

The limiter does not function when

“MANUAL” is set.

The limiter functions at -6dBFS when “AUTO”

is set.

[Setting Values: -9dBFS,

-6dBFS, Off]

AGC Response

Attack Time

Sets the time to activate the limiter.

[Setting Values: Fast,

Middle, Slow]

Decay Time

Sets the time to deactivate the limiter operation.

[Setting Values: Fast,

Middle, Slow]

AGC Mode

For setting whether to link the limiter operation of

[CH1] and [CH2].

Select “Link” to link or “Separate” to separate.

[Setting Values: Link,

Separate]

Memo :

Enabled only when both the [AUX] input terminal

and [INPUT1/INPUT2] input terminal are set to

“LINE” or “MIC”, and CH1/CH2 of the [CH1/CH2

AUTO/MANUAL] switch is set to “AUTO”.

XLR Manual Level

For setting whether to link manual audio

adjustment operation between [INPUT1] and

[INPUT2] terminals.

Select “Link” to link or “Separate” to separate.

When this item is set to “Link”, adjust the recording

level using the [CH1] recording level adjustment

knob.

[Setting Values: Link,

Separate]

Memo :

Enabled only when both the [INPUT1/INPUT2]

input terminals are set to “LINE” or “MIC”, and

both [CH1]/[CH2] of the [CH1/CH2 AUTO/

MANUAL] selection switches are set to

“MANUAL”.

When this item is set to “Link”, [CH2] recording

level adjustment knob is disabled.

A/V Set Menu

135

Menu Display and Detailed Settings

Summary of Contents for Connected Cam GY-HC500E













































































































































































































































































Search results

Summary of Contents for Connected Cam GY-HC500E

Reviews:

Related manuals for Connected Cam GY-HC500E

Brands by name

Popular brands

JVC Connected Cam GY-HC500E, Instructions Manual

Search results

Summary of Contents for Connected Cam GY-HC500E

Reviews:

Related manuals for Connected Cam GY-HC500E

Brands by name

Popular brands