Error Messages and Actions
Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as
follows according to the error status.
Memo :
0
This camera recorder makes use of a microcomputer. Noise interference from external sources may
prevent it from functioning properly. When this occurs, turn off and on the power of the camera recorder
again.
Error Message
Status
Action
Turn Power Off Turn
Back On Later
System error.
* The warning tone sounds and the
tally lamp blinks twice every
second.
Turn off the power, and turn it on again.
If the error persists, please contact the
local dealers in your area.
Fan Stop Detected
Please Turn P.Off
0
The fan stopped running.
Please contact the local dealers in your
area.
Fan Maintenance
Required
Usage time of the fan has exceeded
9000 hours.
Check the fan and replace accordingly.
For more details, please contact the local
dealers in your area.
Memo :
0
You can check the usage time of the
fan in [System]
B
[System
Information]
B
[Fan Hour].
Getting Overheated.
Please Turn Power Off.
0
The battery has exceeded the
specified temperature.
0
The power turns off
automatically after about 15
second.
0
Wait until the temperature drops or
replace the battery.
0
If the error persists, please contact the
local dealers in your area.
Rec Inhibited
[REC] button is pressed when the
write-protect switch of the SD card
is set.
Turn off the write-protect switch of the SD
card, or insert a recordable SD card.
Lost Media Info *
0
Card is removed while recording
is in progress.
0
Card is removed while
formatting is in progress.
0
Card is removed while restoring
is in progress.
0
Card is removed while adding
the OK mark.
0
Card is removed while writing a
setup file.
0
Card is removed while deleting a
clip.
(*: A, B)
Restore the card using this camera
recorder.
248
Error Messages and Actions
Others
Summary of Contents for Connected Cam GY-HC500E
Page 2: ...2 ...
Page 267: ...267 ...