background image

EN

 3

MasterPage: Safety_Right

SAFETY PRECAUTIONS

IMPORTANT (for owners in the U.K.)

Connection to the mains supply in the United 
Kingdom.
DO NOT cut off the mains plug from this equipment.

If the plug fitted is not suitable for the power points in your 
home or the cable is too short to reach a power point, then 
obtain an appropriate safety approved extension lead or 
consult your dealer.

BE SURE to replace the fuse only with an identical 
approved type, as originally fitted, and to replace the 
fuse cover.

If nonetheless the mains plug is cut off be sure to remove 
the fuse and dispose of the plug immediately, to avoid 
possible shock hazard by inadvertent connection to the 
mains supply.
If this product is not supplied fitted with a mains plug then 
follow the instructions given below:

DO NOT

 make any connection to the Larger Terminal 

coded E or Green.
The wires in the mains lead are coloured in accordance 
with the following code:

If these colours do not correspond with the terminal 
identifications of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt — consult a competent electrician.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, 
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTIONS:

To prevent shock, do not open the cabinet. No user 
serviceable parts inside. Refer servicing to qualified 
personnel.

When you are not using the AC Adapter for a long period 
of time, it is recommended that you disconnect the 
power cord from AC outlet.

CAUTION:

To avoid electric shock or 
damage to the unit, first 
firmly insert the small end 
of the power cord into the 
AC Adapter until it is no 
longer wobbly, and then 
plug the larger end of the 
power cord into an AC 
outlet.

CAUTIONS:

This camcorder is designed to be used with PAL-type 
colour television signals. It cannot be used for playback 
with a television of a different standard. However, live 
recording and LCD monitor/viewfinder playback are 
possible anywhere.

Use the JVC BN-V107U/V114U battery packs and, to 
recharge them or to supply power to the camcorder from 
an AC outlet, use the provided multi-voltage AC Adapter. 
(An appropriate conversion adapter may be necessary 
to accommodate different designs of AC outlets in 
different countries.)

Blue to N (Neutral) or 
Black

Brown to L (Live) or 
Red 

Caution on Replaceable lithium battery

The battery used in this device may present a fire or 
chemical burn hazard if mistreated.

Do not recharge, disassemble, heat above 100°C or 
incinerate.

Replace battery with Panasonic (Matsushita Electric), 
Sanyo, Sony or Maxell CR2025.

Danger of explosion or Risk of fire if the battery is 
incorrectly replaced.

Dispose of used battery promptly.

Keep away from children.

Do not disassemble and do not dispose of in fire.

NOTES:

The rating plate (serial number plate) and safety caution 
are on the bottom and/or the back of the main unit.

The rating information and safety caution of the AC 
Adapter are on its upper and lower sides.

When the equipment is installed in a cabinet or on a shelf, 
make sure that it has sufficient space on all sides to allow 
for ventilation (10 cm or more on both sides, on top and at 
the rear).

Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or 
cloth etc. the heat may not be able to get out.)

No naked flame sources, such as lighted candles, should 
be placed on the apparatus.

When discarding batteries, environmental problems must 
be considered and the local rules or laws governing the 
disposal of these batteries must be followed strictly.

The apparatus shall not be exposed to dripping or 
splashing.

Do not use this equipment in a bathroom or places with 
water.
Also do not place any containers filled with water or liquids 
(such as cosmetics or medicines, flower vases, potted 
plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment, fire or 
electric shock may be caused.)

Do not point the lens or the viewfinder directly into the sun. 
This can cause eye injuries, as well as lead to the 
malfunctioning of internal circuitry. There is also a risk of 
fire or electric shock.

CAUTION!

The following notes concern possible physical damage to 
the camcorder and to the user.

Carrying or holding the camcorder by the viewfinder and/or 
the LCD monitor can result in dropping the unit, or in a 
malfunction.

Take care not to get your finger caught in the cassette 
holder cover. Do not let children operate the camcorder, as 
they are particularly susceptible to this type of injury.

Do not use a tripod on unsteady or unlevel surfaces. It 
could tip over, causing serious damage to the camcorder.

CAUTION!

Connecting cables (Audio/Video, S-Video, etc.) to the 
camcorder and leaving it on top of the TV is not 
recommended, as tripping on the cables will cause the 
camcorder to fall, resulting in damage.

GR-DX317PAL.book  Page 3  Friday, March 5, 2004  12:52 PM

Summary of Contents for Digital Video Camera GR-DX78





















































Reviews: