48
Operation
3
Adjustments and settings in the menu (continued)
[1-2] Advanced
Sharpness
You can set the sharpness and detail enhance to "
[1-2-1] Sharpness
" of the submenu
NR
Reduces the noise of the video images. Please adjust to your preference.
RNR
Adjusts the intensity of random noise elimination of the image.
Values: (Low) 0 to16 (strong)
[0]
MNR
Adjusts the intensity of mosquito noise elimination of the video images.
(*) It is not possible to set it when the "Picture Mode" is set to "3D".
Moreover, it is not possible to set it when there is an input of HD input signals.
Values: (Low) 0 to16 (strong)
[0]
BNR
Reduces the block noise of the video images.
(*) ) It is not possible to set it when the "Picture Mode" is set to "3D"
Moreover, it is not possible to set it when there is an input of HD input signals.
Settings: On, Off
[Off]
Color Space
X3
You can switch the color space display of the projector output.
Settings: Standard, Wide 1, Wide 2
Standard
Wide 1
Wide 2
Equivalent to the HDTV color space
Equivalent to the color space of the DCI standard
A color space that is broader than Wide1
Custom Gamma
It is possible to set the gamma curve and save it. Please adjust to your preference.
To "
[1-2-2] Custom Gamma
" of the submenu
Color Management
X7 X9
It is possible to set the color of the screen to the preferred color and save it.
To "
[1-2-3] Color Management
" of the submenu.
Clear Motion Drive
It improves video images with fast movements to produce clear video images with little
residual image retention.
For PC and 3D signals, the "Clear motion Drive” cannot be set.
Moreover, the images in some scenes may be distorted. In such a case, please select
"Off".
Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Film motion
[Off]
Off
Off
Mode 1
Black insertion weak
Mode 2
Black interpolation strong
Mode 3
Interpolation weak
Mode 4
Interpolation strong
Inverse Telecine
With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image
footage is changed to a 24 frame display.
(*) 24p will not function.
CMD Demo
It is possible to confirm the effect of the setting of Mode 3 and Mode 4 of the Clear motion
drive. Upon pressing the button "OK", it will be displayed on all sides of a screen in the
center split into two parts. Finally, it will turn to "Off”. It cannot be set for PC and 3D
signals.
Settings: Left -> right -> top -> Bottom -> Off (changed with "OK" button)
[Off]
Left
The left screen displays a demonstration of the Clear motion drive.
Right
The right screen displays a demonstration of the Clear motion drive.
Top
The upper screen displays a demo of the Clear motion drive.
Bottom
The screen below displays a demo of the Clear motion drive.
Off
The Demo of the Clear motion drive is turned off.
Lens Aperture
Adjusts the amount with which the optical iris is squeezed. A setting of 0 means fully
opened.
Settings: (Dark) -15 to 0 (bright)
[0]
Summary of Contents for DLA-X3
Page 77: ...78 Others 5 MEMO ...
