Aspect
The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that
has been input.
“Adjusting the Screen Size (Aspect)” (P. 27)
Progressive
For setting the interpolation method for the interlaced signals. If the image outline is unnatural, set this item to “Off”.
Setting
Description
Auto
Performs interpolation by automatically detecting whether the interlaced signals
are converted from 24p video images, such as those in film movies, or interlaced
signals of video materials.
Off
Interpolates video images as interlaced signals of video materials, etc.
Mask
For hiding the peripheral area of the image with a mask (black strip).
Setting
Description
Off
Not masked.
Custom 1 to Custom 3
Masks about 0 to 220 pixels of the four sides of the
image.
* The pixel count is 1920 pixels in the horizontal
direction and 1080 pixels in the vertical direction.
3D Setting
For setting 3D movies for viewing.
Picture Position (Horiz./Vert.)
Adjust the position if the edges of the image are partially missing due to the timing of horizontal and vertical
synchronization signals.
* Adjustment cannot be made during 4K, 3D and 1080i signal input.
HDMI2 EDID
For changing the EDID mode of the [HDMI 2] terminal. Set to “A” under normal condition.
Images with resolution 1920x1080 or lower may not be displayed when some old devices are used.
In that case, connect to the [HDMI 2] terminal and set “HDMI2 EDID” to “B”.
* EDID (Extended Display Identification Data) refers to the information, such as supported resolutions, exchanged
between devices.
Mask: black strip around the periphery
On
Off
47
Adjust/Set
