Filename [DR-M7EK_11Subsidiary.fm]
Masterpage:Left+
106
Page 106
April 5, 2004 9:51 am
SUBSIDIARY SETTINGS (cont.)
Scan Mode Set
You can select the scan mode from two modes: Interlaced
scan mode which is used in the conventional TV system,
and Progressive scan mode which enables reproduction
of higher-quality images. For details, refer to
“GLOSSARY” (
墌
pg. 111).
A
Set the scan mode.
Press
PROGRESSIVE SCAN
for 3 or more seconds.
●
Video output indicator (
) lights on the front display panel if
Progressive scan mode has been established. (
墌
pg. 14)
●
Each press of
PROGRESSIVE SCAN
for 3 or more seconds
switches the scan mode.
NOTES:
●
When the progressive mode is set, be sure to set “L-1
OUTPUT” to “COMPONENT”. (
墌
pg. 82, “L-1 Output and
L-1 Input Setting (L-1 OUTPUT and L-1 INPUT)”) Progressive
scan is output only from COMPONENT VIDEO OUT
connector.
●
Interlaced scan mode is the setting at your purchase.
●
When Progressive scan mode is engaged, no video signal is
output from S-VIDEO OUT connector and L-1 IN/OUT
connector.
●
Interlaced scan mode might be suitable depending on video
material.
●
Scan mode cannot be set while menu screen is displayed.
Tray Lock
You can lock the disc tray to prohibit the unwanted disc
ejection by children.
A
Lock the disc tray.
While the unit is turned off, press and hold
8
, then press
x
on the unit. “LOCK” appears on the front display
panel.
●
If you try to eject the discs, “LOCK” appears and indicates that
tray is locked.
To unlock tray
While the unit is turned off, press and hold
8
, then press
x
on the unit. “UNLOCK” appears on the display panel.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
ATTENTION:
Your TV needs to be compatible with PAL Progressive.
●
Turn off the unit.
DR-M7EK_11Subsidiary.fm Page 106 Monday, April 5, 2004 9:51 AM
