Masterpage:Right+
EN
61
Filename [MH200SEU_11Editing.fm]
EDITING
Page 61
Wednesday, 25 May 2005 13:34
9
Press
selection keys
to select
, then press
ENTER
. The dubbing starts.
●
Playback on the external DV equipment and recording on the
unit should start simultaneously.
●
To pause dubbing, press
selection keys
to select
,
then press
ENTER
. Both the unit and the external DV
equipment pause dubbing. Pressing
W
on the unit also works
the same way.
10
Press
selection keys
to select
, then press
ENTER
. Then press
o
. The DV equipment stops.
11
Press
selection keys
to select
, then press
ENTER
.
12
Press
o
twice on the remote control to stop dubbing.
●
Both the unit and the external DV equipment stop dubbing.
NOTES:
●
Dubbing copyright guarded programmes is not possible.
●
Original DV information such as the recording date and time are
not recorded.
●
The superimposed indication during the operation or dubbing is
not recorded.
●
If the dubbing is paused while the channel is set to
A
DV
B
, you
cannot switch channels.
To skip unwanted part of the source picture
Press
ENTER
to stop both equipment, then press
selection keys
to select
.
Locate the point where you want to restart dubbing by pressing
I
,
N
, or
O
, then press
o
.
Press
selection keys
to select
, then press
ENTER
to
restart dubbing.
You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
Example: Dubbing to an MD
1
Connect the unit and a digital audio device using either an
optional optical cable or an optional coaxial cable.
2
Place a disc on the unit and load an MD on the connected
digital audio device.
3
Select the audio to be dubbed.
4
Start playback slightly before the actual point from where you
wish to start dubbing.
5
Press
W
to pause playback.
6
Select the input mode on the connected digital audio device.
7
Press
I
to start playback on the unit.
8
Start recording on the digital audio device.
9
Stop recording on the digital audio device. Then press
o
to stop
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
When you dub from DV equipment other than a
camcorder
A
Perform step
1
to
4
.
B
Locate the point from where you want to start dubbing,
then stop on the DV equipment.
●
If you pause the DV equipment in this step, a few
second’s still picture will be recorded at the beginning of
the recorded programme.
C
Set the input mode to
A
DV INPUT
B
on the DV equipment.
●
If you select an input mode other than
A
DV INPUT
B
,
unwanted pictures may be recorded at the beginning of
the recorded programme.
D
Perform step
9
to
12
.
Digital Audio Dubbing
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
Rear of unit
Note for connection:
Remove the protection cap from the
optical cable.
Digital audio device
(MD deck, etc.)
Coaxial cable
(not supplied)
Player
Recorder
To [DIGITAL AUDIO
OUT (COAXIAL)]
Optical cable
(not supplied)
To [DIGITAL
AUDIO OUT
(OPTICAL)]
MH200SEU_00.book Page 61 Wednesday, May 25, 2005 1:34 PM
