Masterpage:Right+
EN
45
Filename [DR-MV1SEK_06DVD Operation2.fm]
Page 45
April 15, 2004 3:30 pm
OPERATIONS ON DVD DECK
You can programme this unit to timer-record as many as
8 programmes.
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the PlusCode number.
1
Load a recordable disc.
2
Press
VCR/DVD
repeatedly so that the DVD lamp lights up on
the unit.
3
Press VIDEO Plus+ to access the VIDEO Plus+ screen.
4
Press the
number keys
to
enter the PlusCode number of a
programme you wish to record,
then press
ENTER
.
●
If you have made a mistake, press
CANCEL
(
&
) and input the correct
number before you press
ENTER
.
●
To clear all entered numbers at a
time, press
CLEAR
(
8
).
●
If the number you entered is invalid, “PlusCode NO. ERROR
CONFIRM PlusCode NO. THEN RETRY” appears on the TV screen.
Input a valid PlusCode number.
●
If “GUIDE PROGRAMME IS NOT SET SELECT CHANNEL YOU
WANT TO RECORD” appears on the TV screen, set Guide Program
numbers manually. (
墌
pg. 83)
●
When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel some
of the reserved programmes. (
墌
pg. 49)
5
The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
programme data.
●
To cancel this setting, press
VIDEO Plus+
or
RETURN
.
6
Press
w e
to select the desired recording option as required.
Press
rt
to select the desired setting, then press
ENTER
.
●
“STOP” (To advance/go back the stop time by 30 minutes, press and
hold
rt
).
●
“DAILY/WEEKLY” (
墌
pg. 45, “Daily/Weekly Recording”)
●
“REC MODE” (
墌
pg. 42, “Recording Mode”)
●
“NAME” (
墌
pg. 61, “Modify Programme Name”)
●
“VPS/PDC” (
墌
pg. 57, “PDC Recording”)*
* VPS (Video Programme System) recording is not currently available
in the U.K. and not possible with this unit.
7
Press
ENTER
to access the Programme Confirmation screen.
8
Press
ENTER
to complete timer programming.
●
To programme another timer, repeat steps
3
–
8
.
●
If “PROGRAM OVERLAPPED” appears on the TV screen, see
page 49.
9
Press
DVD TIMER
(
#
) to engage the unit’s timer mode. The
DVD timer lamp lights up on the unit and the VCR deck is
automatically selected. Press
1
to turn off the unit. When the
VCR deck is in timer standby mode, the unit is automatically turned
off.
●
To disengage the timer mode, press
DVD TIMER
(
#
) again.
NOTES:
●
There may be cases that VIDEO Plus+ Timer Programming function
prolongs the stop time of the programming.
●
When two successive programmes are recorded on a DVD-RW disc
with VIDEO Plus+ Timer Programming function, the beginning of the
second one may be left off the recording.
●
VIDEO Plus+ Timer Programming is not possible on the discs used
exclusively for On-Disc Timer Programming.
●
If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
Daily/Weekly Recording
You can record programmes with one of the following weekly/daily
timer settings.
WEEKLY
: Select to record a weekly programme.
MON–FRI
: Select to record a daily programme from Monday
through Friday.
MON–SAT
: Select to record a daily programme from Monday
through Saturday.
SUN–SAT
: Select to record a daily programme from Sunday
through Saturday.
VIDEO Plus+
®
Timer Programming
●
Make sure that the unit’s built-in clock is set properly.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “VIDEO Plus+
®
System Setup” (
墌
pg. 83) and
set the Guide Program number correctly.
1
4
7
2
5
8
0
3
6
9
0 – 9
RETURN
ENTER
VIDEO Plus+
CLEAR (
8
)
CANCEL (X)
DVD TIMER (
#
)
VCR/DVD
SAT
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
programme number has been changed, the wrong programme
number will be displayed on the VIDEO Plus+ programme screen in
step
5
. When this happens, set the correct Guide Program number
for that station. (
墌
pg. 83, “VIDEO Plus+
®
System Setup”)
Satellite Receiver Users
To timer-record a satellite broadcast using the VIDEO Plus+
system:
A
Perform “Satellite Receiver Control Setting (DVD Deck Only)”
(
墌
pg. 23).
B
Perform “VIDEO Plus+
®
Timer Programming” (
墌
pg. 45).
C
Leave the satellite receiver’s power on.
DR-MV1SEK_00.book Page 45 Thursday, April 15, 2004 3:30 PM
