Masterpage:Right+
EN
85
Filename [DR-MV1SEK_10Subsidiary.fm]
Page 85
April 15, 2004 3:21 pm
SUBSIDIARY SETTINGS
Delete A Channel
1
Perform steps
1
and
3
of “Manual Channel Set” (
墌
pg. 84) to
access the Confirmation screen before continuing.
2
Press
rt w e
to select the item you want to delete.
3
Press
&
to delete a channel. The item next to the cancelled one
moves up one line.
●
Repeat steps
2
and
3
as necessary.
4
Press
SET UP
to close the Confirmation screen.
Change Station Channel Position
1
Perform steps
1
and
3
of “Manual Channel Set” (
墌
pg. 84) to
access the Confirmation screen before continuing.
2
Press
rt w e
to select the item you want to move, then press
ENTER
.
3
Press
rt w e
to select the new channel position, then press
ENTER
.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move down
one space.
●
Repeat steps
2
and
3
as necessary.
4
Press
SET UP
twice to close the Confirmation screen.
Set Stations (A)
Set station names that are registered in your unit.
1
Perform steps
1
and
3
of “Manual Channel Set” (
墌
pg. 84) to
access the Confirmation screen before continuing.
2
Press
rt w e
to select the item you want.
3
Press
ENTER
twice to access the Manual Channel Set screen.
4
Press
rt
to select “ID”, then press
ENTER
.
5
Press
rt
until the new station’s name (ID) you want to store
appears, then press
ENTER
. Registered station names
(
墌
pg. 100) appear as you press
rt
.
6
Press
w e
to select “OK”, then press
ENTER
.
●
Repeat steps
2
–
6
as necessary.
7
Press
SET UP
twice to close the Confirmation screen.
Set Stations (B)
Set station names other than the ones registered in your unit.
1
Perform steps
1
and
3
of “Manual Channel Set” (
墌
pg. 84) to
access the Confirmation screen and then perform steps
2
and
3
of
“Set Stations (A)” above before continuing.
2
Press
rt
to select “ID”, then press
ENTER
.
3
Press
ENTER
twice.
4
Press
w e
to locate the character insertion point.
5
Press
rt
to cycle through the characters (A–Z, 0–9, –,
f
, +,
I
(space)) and stop when the desired character is indicated, then
press
e
to enter.
●
Enter the remaining characters the same way (maximum of 4).
6
After entering all characters, press
w e
to select “OK”, then
press
ENTER
.
7
Press
SET UP
twice to close the Confirmation screen.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9, –,
f
, +,
I
(space) (maximum of 4).
Fine-Tuning Channels Already Stored
1
Perform steps
1
and
3
of “Manual Channel Set” (
墌
pg. 84) to
access the Confirmation screen before continuing.
2
Press
rt w e
to select the channel you want to fine-tune, then
press
ENTER
.
3
Press
ENTER
twice.
4
Press
ENTER
to access the Manual Channel Set screen. The
Manual Channel Set screen appears.
5
Press
rt
to select “FINE”.
6
Press
w e
until the picture appears in its best quality.
●
Repeat steps
2
–
6
as necessary.
7
Press
SET UP
three times to close the Confirmation scree.
DR-MV1SEK_00.book Page 85 Thursday, April 15, 2004 3:30 PM
