Filename [MV4S_08Basic TimerDub.fm]
Masterpage:Left+
38
EN
EDITING
Page 38Monday, 9 May 2005 09:38
Dubbing An Entire Disc
You can easily use this unit for dubbing without connecting any
other equipment.
1
For DVD deck
Load a disc you want to dub.
For VHS deck
Load a cassette with the record safety tab intact.
2
Press
VHS/DVD
on the unit repeatedly or
VHS
on the remote
control so that the VHS lamp lights up on the unit.
3
Press
REC MODE
repeatedly to set the recording mode.
4
Press
}
DVD
to select the dubbing direction.
●
“
}
” lights up on the unit.
5
Press and hold
DUBBING
for more than 2 seconds to start the
dubbing.
●
If the tape has not been rewound, the VHS deck rewinds the tape
automatically. When the VHS deck has finished rewinding, dubbing
begins automatically.
●
After dubbing is completed, the VHS deck rewinds the tape
automatically and the unit shuts off.
●
To stop dubbing, press
8
.
NOTES:
●
When you turn on the unit next time, press
}
DVD
so that “
}
” lights
off before performing any operations. If it is not done, recording on
the VHS deck is not possible.
●
It is not possible to start dubbing if the unit retains a memory of the
resume points. Press
8
twice to clear the resume points.
●
There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually stars.
●
The superimposed indication during the operation or dubbing is not
recorded.
●
When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
●
When the progressive mode is set, “
}
” does not light up on the unit.
Press
PROGRESSIVE SCAN
so that video output indicator (
)
lights off on the front display panel.
●
It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc
recorded on the devices from other manufacturers or on a PC. In
such case, perform “Manual Dubbing (From DVD To VHS)”
(
●
It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
●
If “
]
” lights up on the unit and you play back a DVD VIDEO disc, the
images dubbed to the VHS deck may not be output to the TV
properly.
Disc Dubbing (From DVD To VHS)
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Make sure that both the DVD deck and the VHS deck are in the
stop mode.
●
Set “SUPERIMPOSE” to “OFF”. (
PROGRESSIVE
SCAN
VHS
REC MODE
DVD
V
HS/D
V
D
D
V
D
V
HS
REC
V
HS
D
V
D
DUBBI
N
G
CH
STA
N
DBY/O
N
S-
V
IDEO
V
IDEO
AUDIO
ONE‑TOUCH EXPERT DUB
DVD
(MONO)
F−1
VHS/DVD DUBBING
}
DVD
MV4S_08Basic TimerDub.fm Page 38 Monday, May 9, 2005 9:38 AM
