18
Initial Setup W
Initial Setup W
izard
izard
After the STANDBY/ON is pressed for the first time to
turn on the unit
or after factory setting (See page 20)
,
the Initial Setup Wizard function sets the Language,
Channels and Clock step-by-step until the setup is
complete.
1. Use
v / V
to select a language for the Setup
menu and information display then press ENTER.
2. Check your antenna connections.
Press
B
to move next step.
3. Select the [Tuning Band] option then press
B
.
TV
is for over-the-air antenna reception.
CATV
is for cable subscribers.
4. Press ENTER to begin the channel search.
You can skip the analog channel scanning by
pressing
B
.
5. Enter the necessary information for year, date and
time.
b / B
(left/right): Moves the cursor to the
previous or next column.
v / V
(up/down): Changes the setting at the
current cursor position.
Press ENTER to confirm your setting.
6. Press ENTER to exit the menu.
Note:
You can reset the Initial Setup Wizard from the
[Factory Set] in the setup menu. (see page 20).
