Masterpage:Right0
EN
55
Filename [MX1S_09Timer Recording.fm]
Page 55Saturday, 30 October 2004 16:18
TIMER RECORDING ON HDD/DVD DECK
You can program this unit to timer-record as many as
32 programs.
With the VCR Plus+ system, timer programming is greatly
simplified because each TV program has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
1
Load a recordable disc if recording to DVD.
2
Press
PROGRAM
to access the program top screen.
3
Press
rtw e
to select “VCR Plus+ PR.”, then press
ENTER
.
●
When “PROGRAM FULL DELETE UNWANTED TIMER
PROGRAMS” appears on the TV screen, you need to cancel some of
the reserved programs. (
4
Press the
number keys
to
enter the VCR Plus+ number of a
program you wish to record.
OR
Press
rtw e
to select the
desired number key on the
screen, then press
ENTER
.
Repeat to enter all required
numbers.
●
If you have made a mistake, press
rtw e
to select “DELETE” or
“DELETE ALL’, then press
ENTER
and input the correct number
before you press
ENTER
again.
5
Press
rt
to select “RECORD TO”, then press
ENTER
. Press
rt
to select the desired recording deck, then press
ENTER
.
6
Press
rtw e
to select “CONFIRM”, then press
ENTER
.
●
If the number you entered is invalid, “PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY” appears on the TV
screen. Input a valid PlusCode number.
●
If “GUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN
RETRY” appears on the TV screen, set Guide Channel Numbers
manually. (
7
The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
program data.
●
To cancel this setting, press
RETURN
.
8
Press
rt
to select the desired recording option as required.
Press
rt
to select the desired setting, then press
ENTER
.
●
“INPUT TITLE” (
●
“CATEGORY” (
●
“WEEKLY/DAILY” (
pg. 56, “Weekly/Daily Recording”)
●
“REC MODE” (
9
Press
rt
to select “OK”, then press
ENTER
to access the
Program Confirmation screen.
10
Press
w e
to select “EXIT”, then press
ENTER
to complete
timer programming.
●
To program another timer, press
w e
to select “CONTINUE”, then
press
ENTER
.
●
If “PROGRAM OVERLAPPED” appears on the TV screen, see
page 58.
NOTES:
●
There may be cases that the VCR Plus+ Timer Programming
function prolongs the stop time of the programming.
●
When two successive programs are recorded on a DVD-RW disc
with the VCR Plus+ Timer Programming function, the beginning of
the second one may be left off the recording.
●
If the copy limited program is received during timer-recording, the unit
enters Record Pause mode. Recording starts again if it is switched to
a recordable broadcast during the time you programmed.
VCR Plus+ C
3
®
Timer Programming
●
Make sure that the unit’s built-in clock is set properly.
●
Turn on the unit.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/CABLE/DBS/DVD
switch to
DVD
.
PROGRAM
0 – 9
RETURN
ENTER
CABLE/DBS
DVD
TV
PROGRAM > VCR PLUS+ (1/2)
PLUS CODE NO.
PRESS [PROGRAM]
TO EXIT
SELECT WITH [ ]
THEN PRESS [ENTER]
CONFIRM
RECORD TO
1 2 3 4
1
2
4
5
6
7
8
9
0
DELETE
DELETE ALL
DVD
ENTER
SELECT
EXIT
PROGRAM
3
1
2
3
1
2
2
3
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “Changing VCR Plus+
set the Guide Channel number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, the wrong channel number will
be displayed on the VCR Plus+ program screen in step
. When this
happens, set the correct Guide Channel number for that station.
(
Cable Box and DBS Receiver Users
To timer-record a satellite broadcast using the VCR Plus+
system:
A
Perform “Cable Box and/or DBS Receiver Control Setting
B
Perform “VCR Plus+ C
C
Leave the cable box or DBS receiver’s power on.
MX1S_00.book Page 55 Saturday, October 30, 2004 4:18 PM
