Filename [MX1S_11Editing.fm]
Masterpage:Left+
72
EN
EDITING
Page 72
Saturday, 30 October 2004 16:18
Dubbing From VHS To HDD
(Dubbing An Entire Cassette)
It is possible to perform automatic dubbing of all the recorded
programs of a cassette from the VHS deck to the HDD deck using
the “ENTIRE” dubbing.
1
Load the cassette you want to dub.
●
Set “PICTURE CONTROL” to “EDIT” (
●
Set “VIDEO STABILIZER”
to “OFF” (
pg. 85). However, if this is
set
to “ON” during dubbing, it will be set to “OFF” automatically to
prevent image distortion. It will return to “ON” after dubbing is
completed.
2
Press
DUBBING
to access the Dubbing Menu screen.
3
Press
rtw e
to select “VHS
]
HDD”, then press
ENTER
.
4
Press
w e
to select “ENTIRE”, then press
ENTER
.
5
Press
rt
to select “SELECT RECORDING MODE”, then press
ENTER
. Press
rt
to select the desired option (SP or EP), then
press
ENTER
. The confirmation screen appears.
6
Press
rt
to “SELECT SOUND MODE”, then press
ENTER
.
Press
rt
to select the desired option (L/R, L, R or NORM), then
press
ENTER
. The confirmation screen appears.
7
Press
t
to select “CONFIRM”, then press
ENTER
.
8
Press
w e
to select “EXECUTE”, then press
ENTER
for
confirmation.
●
To cancel the dubbing, press
8
then
w e
to select “CANCEL” and
press
ENTER
to confirm.
●
If the tape is not rewind, the unit will start dubbing after automatically
rewinding the tape to the beginning.
●
Upon completing dubbing, the tape will automatically be rewind.
NOTES:
●
“SUPERIMPOSE” is automatically set to “OFF”. It will return to
“AUTO” after dubbing is completed.
●
The program information at the VHS deck will not be dubbed.
●
When there are blanks on the tape of more than 2 seconds, the HDD
deck will enter into pause mode. Dubbing will resume once recorded
portion is detected.
●
Dubbing copyright guarded tape is not possible.
●
When you select “EDIT” to dub tapes in step
, be sure to select
“NORM” after you finish dubbing the tapes.
●
When dubbing is in progress, only
8
is functional.
Dubbing From VHS To HDD
(Dubbing A Program From Cassette)
It is possible to dub a single title (program) of a cassette from the
VHS deck to the HDD deck using the “1 PROG.” dubbing.
1
Load the cassette you want to dub.
●
Set “PICTURE CONTROL” to “EDIT” (
●
Set “VIDEO STABILIZER”
to “OFF” (
pg. 85). However, if this is
set
to “ON” during dubbing, it will be set to “OFF” automatically to
prevent image distortion. It will return to “ON” after dubbing is
completed.
2
Press
DUBBING
to access the Dubbing Menu screen.
3
Press
rtw e
to select “VHS
]
HDD”, then press
ENTER
.
4
Press
w e
to select “1 PROG.”, then press
ENTER
.
5
After pressing
r
and
ENTER
, press
rt
to select the recording
mode, then press
ENTER
.
6
Press
VHS
so that the VHS lamp lights up on the unit.
The current display on the screen will be switched to a receiving
broadcast display.
7
Press
AUDIO
to select the playback sound.
8
Press
4
to locate the point from where you want to start
dubbing, then press
9
.
VHS deck enters the record pause mode.
9
Press
HDD
so that the HDD lamp lights up on the unit.
The current display on the screen will be switched to a receiving
broadcast display.
10
Press
w e
to select “EXECUTE”, then press
ENTER
for
confirmation.
●
To cancel the dubbing, press
8
then
w e
to select “CANCEL” and
press
ENTER
to confirm.
NOTES:
●
“SUPERIMPOSE” is automatically set to “OFF”. It will return to
“AUTO” after dubbing is completed.
●
The program information at the VHS deck will not be dubbed.
●
When there are blanks on the tape of more than 2 seconds, the HDD
deck will enter into pause mode. Dubbing will resume once recorded
portion is detected.
●
Dubbing copyright guarded tape is not possible.
●
When you select “EDIT” to dub tapes in step
, be sure to select
“NORM” after you finish dubbing the tapes.
●
When dubbing is in progress, only
8
is functional.
Dubbing From VHS To DVD
(Dubbing An Entire Cassette)
It is possible to perform automatic dubbing of all the recorded
programs of a cassette from the VHS deck to the DVD deck using
the “ENTIRE” dubbing.
1
Load the cassette you want to dub.
●
Set “PICTURE CONTROL” to “EDIT” (
●
Set “VIDEO STABILIZER”
to “OFF” (
pg. 85). However, if this is
set
to “ON” during dubbing, it will be set to “OFF” automatically to
prevent image distortion. It will return to “ON” after dubbing is
completed.
2
Press
DUBBING
to access the Dubbing Menu screen.
3
Press
rtw e
to select “VHS
]
DVD”, then press
ENTER
.
4
Press
w e
to select “ENTIRE”, then press
ENTER
.
5
Press
rt
to select “SELECT RECORDING MODE”, then press
ENTER
. Press
rt
to select the desired option (SP or EP), then
press
ENTER
. The confirmation screen appears.
6
Press
rt
to “SELECT SOUND MODE”, then press
ENTER
.
Press
rt
to select the desired option (L/R, L, R or NORM), then
press
ENTER
. The confirmation screen appears.
7
Press
t
to select “CONFIRM”, then press
ENTER
.
8
Press
w e
to select “EXECUTE”, then press
ENTER
for
confirmation.
●
To cancel the dubbing, press
8
then
w e
to select “CANCEL” and
press
ENTER
to confirm.
●
If the tape is not rewind, the unit will start dubbing after automatically
rewinding the tape to the beginning.
●
Upon completing dubbing, the tape will automatically be rewind.
NOTES:
●
“SUPERIMPOSE” is automatically set to “OFF”. It will return to
“AUTO” after dubbing is completed.
●
The program information at the VHS deck will not be dubbed.
●
When there are blanks on the tape of more than 2 seconds, the DVD
deck will enter into pause mode. Dubbing will resume once recorded
portion is detected.
●
Dubbing copyright guarded tape is not possible.
●
When you select “EDIT” to dub tapes in step
, be sure to select
“NORM” after you finish dubbing the tapes.
●
When dubbing is in progress, only
8
is functional.
MX1S_00.book Page 72 Saturday, October 30, 2004 4:18 PM
