Filename [MX1S_11Editing.fm]
Masterpage:Left0
70
EN
Page 70
Saturday, 30 October 2004 16:18
EDITING
NOTES:
●
It is not possible to dub simultaneously when timer programming is
set. Select either dubbing or timer programming.
●
The order of the index which are displayed by pressing
DUBBING
differs from the images displayed by pressing
NAVIGATION
or
EDIT
.
High Speed Dubbing (From HDD To DVD)
It is possible to dub the original recordings and/or play lists on the
HDD deck to DVD discs. The dubbing is performed in high speed,
keeping the original transfer rate.
NOTES:
●
After accessing the Dubbing Menu screen, it is not possible to take
out a disc.
●
It is not possible to dub copy-once titles in Video mode.
●
When dubbing a copy-once title, the data will be moved from HDD to
DVD upon completing dubbing.
●
When you cancel dubbing a copy-once title during dubbing, the
original recording on the HDD deck remains and the title copied to a
DVD disc is deleted.
●
It is not possible to dub play lists which contain copy-once titles.
●
It is not possible to dub the following programs to DVD-R/RW disc
(Video mode):
●
which contains more than one audio language.
●
which is on the play list.
●
which is edited (also Live Memory Recording).
●
which is recorded in LP mode or FP155-FP240 mode.
●
Recording may not be performed in the highest speed depending on
the characteristics of the disc used.
1
Load a recordable disc.
2
Press
DUBBING
to access the Dubbing Menu screen.
3
Press
rtw e
to select “HDD
]
DVD”, then press
ENTER
.
4
Press
rtw e
to select “HIGH SPEED”, then press
ENTER
.
5
Press
rtw e
to select indexes (small pictures) of desired
original recordings and/or play lists, then press
MARK
. After
selecting all indexes you want to dub, press
ENTER
.
●
You can select up to 8 original recordings and/or play lists.
●
The recordable time of the disc is displayed on the bar meter. For
details, refer to “About Disc Remaining Display” (
6
Press
w e
to select “EXECUTE”, then press
ENTER
. The
dubbing screen appears for 5 seconds. To display the dubbing
screen again, press
ON SCREEN
.
EXECUTE
: Select this to continue the dubbing operations.
CANCEL
: Select this to cancel dubbing operation.
NOTES:
●
Play lists are dubbed as programs.
●
In Video mode, if the selected play list includes the scenes recorded
in the different transfer rate, the dubbing is performed in the highest
transfer rate of the scenes in the selected play list.
●
During dubbing, it is not possible to play back on HDD or DVD, or to
set timer programming.
Just Dubbing (From HDD To DVD)
By using Just Dubbing function, when dubbing all selected original
recordings and/or play lists, the unit automatically sets the
appropriate recording mode depending on the combination of the
total time of the selected recordings and/or play lists to be dubbed
and the available disc space.
1
Load a recordable disc.
2
Press
DUBBING
to access the Dubbing Menu screen.
3
Press
rtw e
to select “HDD
]
DVD”, then press
ENTER
.
4
Press
rtw e
to select “JUST”, then press
ENTER
.
5
Perform steps
–
of “High Speed Dubbing (From HDD To
NOTES:
●
Play lists are dubbed as programs.
●
In Video mode, if the selected play list includes the scenes recorded
in the different transfer rate, the dubbing is performed in the highest
transfer rate of the scenes in the selected play list. However, the
lower transfer rate cannot be dubbed in the higher transfer rate.
●
The recordable time of the disc is displayed on the bar meter. For
details, refer to “About Disc Remaining Display” (
墌
pg. 73).
●
During dubbing, it is not possible to play back on HDD or DVD, or to
set timer programming.
Manual Dubbing (From HDD To DVD)
It is possible to perform dubbing in the desired transfer rate.
1
Load a recordable disc.
2
Press
DUBBING
to access the Dubbing Menu screen.
3
Press
rtw e
4
Press
rtw e
to select “MANUAL”, then press
ENTER
.
5
Perform step
5
of “High Speed Dubbing (From HDD To DVD)”.
The Manual Dubbing screen appears.
6
Press
rt
to select “REC MODE”, then press
ENTER
. Press
rt
to select the desired option, then press
ENTER
.
7
Press
rt
to select “CONFIRM”, then press
ENTER
. The
confirmation screen appears.
8
Press
w e
to select “EXECUTE”, then press
ENTER
. The
dubbing screen appears for 5 seconds. To display the dubbing
screen again, press
ON SCREEN
.
EXECUTE
: Select this to continue the dubbing operations.
CANCEL
: Select this to cancel dubbing operation.
NOTES:
●
In Video mode, if the selected play list includes the scenes recorded
in the different transfer rate, the dubbing is performed in the highest
transfer rate of the scenes in the selected play list. However, the
lower transfer rate cannot be dubbed in the higher transfer rate.
●
The recordable time of the disc is displayed on the bar meter. For
details, refer to “About Disc Remaining Display” (
墌
pg. 73).
●
During dubbing, it is not possible to play back on HDD or DVD, or to
set timer programming.
Dubbing
●
Turn on the unit.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/CABLE/DBS/DVD
switch to
DVD
.
rtwe
MARK
DVD
ENTER
DUBBING
ON SCREEN
4
7
8
AUDIO
9
HDD
VHS
CABLE/DBS
DVD
TV
MX1S_00.book Page 70 Saturday, October 30, 2004 4:18 PM
