Inserting an SD Card
Insert a commercially available SD card before recording.
This unit comes with two SD card slots. When two SD cards are inserted, recordings can
be continued on the other card even if one card is full.
.
Turn off the power of this unit before
inserting or removing a card.
(Base)
Slot B
Slot A
Label
Insert an SD card into slot A.
Open the cover.
Close the LCD monitor.
o
To remove the card
Push the card inward once, then pull it out straight.
.
(Base)
NOTE
Operations are confirmed on the following SD cards.
Manufacturer
Panasonic, TOSHIBA, SanDisk, Eye-Fi*
Video
A
Class 4 or higher compatible SD card (2 GB) / Class 4 or
higher compatible SDHC card (4 GB to 32 GB) / Class 4 or
higher compatible SDXC card (48 GB to 64 GB)
Still Image
B
SD card (256 MB to 2 GB) / SDHC card (4 GB to 32 GB) /
SDXC card (48 GB to 64 GB)
Eye-Fi
Eye-Fi Connect X2 / Eye-Fi Explore X2 / Eye-Fi Pro X2
*Only the specified models may be used. Refer to the Detailed User Guide for
details.
0
Using SD cards (including SDHC/SDXC cards) other than those specified above
may result in recording failure or data loss.
0
To protect the data, do not touch the terminals of the SD card.
0
Eye-Fi manufactures SD memory cards with wireless LAN function.
10
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/
