1-18 (No.YF335<Rev.001>)
NOTE16b:
When removing the CCD BASE ASSY, be careful in han-
dling as the CCD IMAGE SENSOR may be removed togeth-
er with the SHEET and the OP LPF attached.
NOTE16c:
Be careful with the attachment direction of the OP LPF.
NOTE17a:
During the procedure, be careful with the wiring of the FPC.
Be very careful not to bend or damage the FPC.
NOTE17b:
To attach the MONITOR ASSY, first, set the screws L17b
and 2
×
L17c to the correct positions. Next, tighten the screw
40 first, and then tighten the screw 39.
NOTE17c:
Refer to 3.2.3 DISASSEMBLY OF Disassembly of [17]
MONITOR ASSY.
NOTE18a:
During the procedure, be careful in handling the parts.
NOTE18b:
During the procedure, hold the outer rim of the SPEAKER.
NOTE18c:
When attaching the SPEAKER, be careful so that the
SPEAKER terminal and the BKT (SPK) do not contact.
NOTE18d:
When attaching the SPEAKER, be careful in handling the
WIRE (SPK).
z
Destination of connectors
CN.
No.
PIN
No.
CONNECTOR
CN4
MAIN
CN104
OPE UNIT
-
6
CN5 MAIN
CN211 MIC
- 6
CN6 SD
CN851 MAIN
CN102 40
CN8a MAIN
CN4201
CCD
CN5001 22
CN8b MAIN
CN106
OP BLOCK ASSY
-
25
CN9 REAR
CN601 MAIN
CN103 45
CN11a MAIN
CN101
MONITOR
CN703 20
CN11b MAIN
CN281
SPEAKER
-
2