1-8 (No.YF335<Rev.001>)
3.Execute update
(1)Disconnect the USB cable, and remove Everio from the PC.
* In about 30 seconds after the removal, the update start screen appears.
(2)When the displayed current version is an old one, select "YES", and then press (OK).
Fig.2-2-5
(3)When the displayed current version is an old one, select "YES", and then press (OK).
* It takes about 4 minutes and 30 seconds to complete the update.
Fig.2-2-6
(4)Select "OK", and then re-start Everio.
Fig.2-2-7
(5)After the re-start, check that the current firmware is updated in UPDATE.
MENU > BASIC SETTINGS > UPDATE
Fig.2-2-8
When the updated firmware version is confirmed, select "NO", and then press (OK).
The firmware update is completed.