o
Setting the camera to the pan cradle.
0
For how to connect the pan cradle and the camera, refer to the instruction
manual of the pan cradle for further details.
1
Set the camera to the pan cradle.
.
0
For how to connect the pan cradle and the camera, refer to the
instruction manual of the pan cradle for further details.
2
Set the power of the pan cradle to “ON”.
.
3
Wait until the pan cradle stops the rotation.
.
0
When the power is turned ON, pan cradle moves to the left/right to
adjust the position.
o
Operations from the smartphone application
0
Connect the camera and the smartphone via DIRECT MONITORING or
INDOOR MONITORING/OUTDOOR MONITORING.
“Image Monitoring via Direct Connection (DIRECT MONITORING)”
“Image Monitoring via an Access Point at Home (INDOOR MONITORING)”
“Image Monitoring via the Internet (OUTDOOR MONITORING)”
1
Start “Everio sync. 2”.
.
0
Start the application after confirming that the smartphone is
connected to this camera.
2
Tap the connection method.
.
3
Tap
E
/
F
to perform the panning operation.
Using Wi-Fi
151