0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap
E
or
F
to move one space to the left or right.
0
After setting, tap “SET”.
9
Tap “CHANGE” to change the SMTP port.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0
Change the SMTP port number (if necessary) and tap “SET”.
.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap
E
or
F
to move one space to the left or right.
0
After setting, tap “SET”.
10
Tap “CHANGE” to change the authentication.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0
Tap the desired “AUTHENTICATE METHOD”.
.
11
Tap “NEXT”.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0
The following does not appear if “AUTHENTICATE METHOD” is set
to “NONE”.
0
Tap “CHANGE” to change the contents that are already set.
0
Enter the username and tap “SET”.
.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap
E
or
F
to move one space to the left or right.
0
After setting, tap “SET”.
12
Tap “NEXT”.
(Operation on this camera)
.
0
The following does not appear if “AUTHENTICATE METHOD” is set
to “NONE”.
0
Tap “CHANGE” to change the contents that are already set.
0
Enter the password and tap “SET”.
.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap
E
or
F
to move one space to the left or right.
0
After setting, tap “SET”.
13
Tap “QUIT” or “SEND TEST EMAIL”.
(Operation on this camera)
.
SENDER'S EMAIL
Enter the sender’s e-mail address.
SMTP SERVER
Enter the SMTP server address.
SMTP PORT
Set this when the SMTP port number needs to be
changed.
Using Wi-Fi
160