Attaching the Core Filter
Attaching core filter to the cable of the AC adapter and the optional AV cable
(on the end connected to this unit) can reduce the interference generated
when this unit is connected to an external device.
0
Use the small core filter with the power cable, and the large core filter with
the AV cable.
0
Do not attach the core filter to the provided adapter cable.
.
Wind once (for AV Cable)
Wind twice (for AC Adapter cable)
To be connected to this unit
3 cm
Release the stopper
Inserting an SD Card
When a commercially available SD card is inserted, recordings can still be
made to the card without stopping when the remaining recording time on the
built-in memory runs out.
Depending on the setting of the recording media, recording can be made to
the SD card without using the built-in memory.
“Approximate Video Recording Time” (
1
Open the terminal cover.
.
2
Close the LCD monitor to turn off this unit.
3
Insert an SD card.
.
Label
Warning
0
Make sure not to insert the SD card in the wrong direction.
It may cause damage to the unit and SD card.
0
Before inserting or removing the SD card, close the LCD monitor and
ensure that the POWER/ACCESS lamp goes off.
0
Do not touch the metal contact area when inserting the SD card.
Memo :
0
To use a new SD card, or SD card used on other devices, it is necessary
to format (initialize) the SD card using “FORMAT SD CARD” from the
“SETUP” menu.
Getting Started
12