Perform regular maintenance of this unit to enable it to be used for a long
time.
Caution :
0
Be sure to detach the AC adapter and power plug before performing any
maintenance.
Camcorder
0
Wipe this unit with a dry, soft cloth to remove any dirt.
0
When it is extremely dirty, soak the cloth in a solution of neutral detergent,
wipe the body with it, and then use a clean cloth to remove the detergent.
Caution :
0
Do not use solvents such as benzene, thinner, or alcohol. Doing so may
cause damage to the unit.
0
When using a chemical cloth or cleaner, be sure to observe the warning
labels and instructions of the product.
0
Do not leave the device in contact with rubber or plastic products for a long
time.
Lens/LCD Monitor
0
Use a lens blower (commercially available) to remove any dust, and a
cleaning cloth (commercially available) to wipe off any dirt.
Mold may form if the lens is left dirty.
0
You can use a commercially available anti-reflection or protective film on
the screen.
However, depending on the thickness of the film, operations on the touch
screen may not be performed smoothly or the screen may darken slightly.
After using underwater or on the beach
0
For care and cleaning where there is mud or dirt on the camera after using
underwater or on the beach, read “Before Using Underwater or under Low
Maintenance
139
