EN
27
FOCUS
AUTO
Adjusts focus automatically.
MANU
Allows you to adjust focus manually (
Z
pg. 28, 29).
EXPOSURE
AUTO
Adjusts exposure automatically.
MANU
Allows you to adjust exposure manually (
Z
pg. 30).
DATE/TIME
Allows you to set the current date and time (
Z
pg. 11).
TELE MACRO
Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a distance
more than 1m (3.3 ft.) to the subject, the lens is out of focus at
the maximum telephoto setting. When set to “ON”, you can
shoot a subject as large as possible at a distance of approx.
60 cm (2 ft.).
•Depending on the zoom position, the lens may go out of focus.
TAPE LENGTH
Allows you to set the tape length depending on the tape used (
Z
pg. 12).
M.W.B.
This camcorder’s Automatic Color Temperature system senses
the color temperature of the ambient lighting for automatic
white balance adjustment. However, precise color adjustment is
not possible under the following conditions:
• When an object is in various shades of the same color.
• When a predominantly red or brown object is being shot
outdoors.
In these cases, use the camcorder’s built-in preset filters for
white balance adjustment (
Z
pg. 31).
ZOOM SPEED
Allows you to set the zooming speed (
Z
pg. 18).
REC TIME
This feature allows you to set the parameters for Animation and Time-Lapse
recording (
Z
pg. 33).
INT. TIME
This feature allows you to set the parameters for Self-Timer (
Z
pg. 32) and Time-
Lapse recording (
Z
pg. 33).
ON
The tally lamp comes on to signal the start of recording.
(available only for GR-AX77)
OFF
The tally lamp remains off at all times.
(GR-AX47: always set to this mode.)
TITLE LANG.
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
of Instant Titles (
Z
pg. 25).
JLIP ID NO.
This number is necessary when connecting the camcorder to a device such as a
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory
setting is 07.
DEMO MODE
OFF
Automatic demonstration will not take place.
ON
Demonstrates certain functions such as the Fader, Instant Titles
etc. When “DEMO MODE” is set to “ON” and the Menu Screen
is closed, demonstration starts.
NOTES:
●
When a tape whose Erase Protection tab is in the position that allows
recording is loaded in the camcorder, demonstration is not available.
●
By turning off the camcorder or inserting a tape whose Erase Protection
tab is in the position that allows recording into it, “DEMO MODE” is
set to “OFF” automatically.
●
During demonstration, all functions except zoom are disabled.
OFF
ON
AUTO
: FINE
: CLOUD
: HALOGEN
MWB
FAST
SLOW
= Factory setting and when the Select Dial is set to AUTO LOCK
TALLY LAMP
Summary of Contents for GR-AX47
Page 44: ...44EN INDEX Controls 4 3 u p i o 1 9 0 5 6 7 8 W q w e r R t y E T 2 Q ...
Page 54: ...MEMO ...
Page 55: ...MEMO ...
