EN
15
1
3
3
2
2
180
°
180
°
2
3
1
4
PAUSE
Power Zoom Lever
Recording
Start/Stop Button
Set to “CAMERA”
(“AUTO” or “PRO.”).
Grip Adjustment
1
Separate the Velcro strip.
2
Pass your right hand through the loop and grasp the
grip.
3
Adjust so that your thumb and fingers can easily
operate the Recording Start/Stop Button and Power
Zoom Lever. Refasten the Velcro strip.
Viewfinder Adjustment
1
Set the Power Switch to “CAMERA” (“AUTO” or
“PRO.”).
2
Adjust the viewfinder manually for best viewability.
3
Turn the Diopter Adjustment Control until the
indications in the viewfinder are clearly focused.
Shoulder Strap Attachment
1
Following the illustration, thread the strap through the
eyelet
1
, then fold it back and thread it through the
buckle
2
. Repeat the procedure to attach the other
end of the strap to the other eyelet
3
, making sure
the strap is not twisted.
2
Adjust as shown in the illustration
4
.
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
Tripod Mounting
1
Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.
