20
EN
RECORDING
Basic Features (cont.)
Auto Date Record mode
Date display
Time display
Date/Time display
Date-off mode (No display)
PM10:50:00
Date display
Time display
Date/Time display
DEC 25.98
DEC 25.98 PM10:50:00
Auto date record mode
Auto date record
executed
DEC 25.98
AUTO DATE
Auto Date Record mode
DATE/TIME
FEATURE:
Date/Time Insert
PURPOSE:
To display the date and time in the
viewfinder or on a connected color
monitor, as well as to record them
manually or automatically.
OPERATION:
1)
Turn the Select Dial to any
position except AUTO LOCK.
2)
Choose a display mode by
pressing
DATE/TIME
repeatedly
while in Record-Standby to cycle
through the modes as shown in the
illustration at left.
n
You should have already
performed the Date/Time Setting
procedure (
Z
pg. 11). If you
haven’t, do so first.
NOTES:
DISPLAY
●
The selected display can be
recorded.
●
If you don’t want to record the
display, select the Date-off mode
before shooting.
●
If you want to delete the display
during shooting, press
DATE/TIME
.
●
To recall the display, engage the
Record-Standby mode and press
DATE/TIME
repeatedly until the
desired display appears.
AUTO DATE RECORD
●
Your camcorder automatically
records the date for about 5
seconds after recording is initiated
in the following situations:
•
After changing the date.
•
After loading a cassette.
•
After Auto Date Record mode is
selected by pressing
DATE/TIME
.
In this mode, the date is replaced
after 5 seconds with “AUTO DATE”
but this is not recorded.
●
Setting the Select Dial to AUTO
LOCK always engages the Auto
Date Record mode, and disables
all other modes.
Select Dial
Display
