1-18 (No.YF073)
•
Conn. ring
The connector ring to attach the INF lens to the head of the OP
lens. For the usage of the Conn.ring.
•
INF Adjustment Lens
To be used for adjustment of the camera system. For the us-
age of the INF adjustment lens, refer to the Service Bulletin
No. YA-SB-10035.
•
INF Adjustment Lens Holder
To be used together with the Camera stand (11) for operating
the Videocamera in the stripped-down condition such as the
status without the exterior parts or for using commodities that
are not yet conformable to the interchangeable ring. For the
usage of the INF lens holder, refer to the Service Bulletin No.
YA-SB-10035.
•
Camera Stand
To be used together with the INF adjustment lens holder. For
the usage of the Camera stand, refer to the Service Bulletin
No. YA-SB-10035.
•
Light box Assembly
To be used for adjustment of the camera system. For the us-
age of the Light box assembly, refer to the Service Bulletin No.
YA-SB-10035.
•
Gray Scale Chart
To be used for adjustment of the camera system. For the us-
age of the INF adjustment lens, refer to the Service Bulletin
No. YA-SB-10035.
•
Color Bar Chart
To be used for adjustment of the camera system. For the us-
age of the INF adjustment lens, refer to the Service Bulletin
No. YA-SB-10035.
•
Jig Connector Cable
To be connected to the Jig connector jack of the main board
and used for measurement and adjustment.
•
PC Cable
To be used to connect the Videocamera and a personal com-
puter with each other when a personal computer issued for ad-
justment.
•
Communication Cable
Connect the Communication cable between the PC cable and
Jig connector cable when performing a PC adjustment.
•
Service Support System
To be used for adjustment with a personal computer. Software
can be downloaded also from JS-net.
4.2
JIG CONNECTOR CABLE CONNECTION
Connection procedure
Fig.4-2-1
Jig connector diagrams
Fig.4-2-2
SERVICE SUPPORT SYSTEM
RS232C
COM PORT
PC CABLE
PERSONAL COMPUTER
MENU
COVER(JIG)
JIG CONNECTOR
CABLE
CN25
RED
TO 8 PIN
( RXD )
WHITE
BLACK
TO 7 PIN
( TXD )
TO 6 OR 16 PIN
( GND )
JIG CONNECTOR COMMUNICATION CABLE
JIG CONNECTOR CABLE (YTU93082G)
MAIN CN25
JIG BOARD (LABEL)
AL_J3.2V
1
1
AL_J3.2V
MCU_RST
11
2
VIDL
VIDL
2
3
DIAL_PB
V_TP_FM
12
4
DIAL_MN
DIAL_PB
3
5
JIGCN_SW
V_FF
13
6
GND
DIAL_MN
4
7
TXD
ST/EJ_SW
14
8
RXD
JIGCN_SW
5
9
PLI_AD
PB_CTL
15
10
VPP_7.8V
GND
6
11
MCU_RST
GND
16
12
V_TP_FM
TXD
7
13
V_FF
V_OUT
17
14
ST/EJ_SW
RXD
8
15
PB_CTL
AO_SIG_J
18
16
GND
PLI_AD
9
17
V_OUT
V_OVL
19
18
AO_SIG_J
VPP_7.8V
10
19
V_OVL
DISCHG_L
20
20
DISCHG_L
