EN
29
Adjusts focus automatically.
Allows you to adjust focus manually (
Z
pg. 30, 31).
Adjusts exposure automatically.
Allows you to adjust exposure manually (
Z
pg. 32).
Allows you to set the current date and time (
Z
pg. 11).
Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a distance
more than 1m (3.3 ft.) to the subject, the lens is out of focus at
the maximum telephoto setting. When set to “ON”, you can
shoot a subject as large as possible at a distance of approx. 60
cm (2 ft.).
•Depending on the zoom position, the lens may go out of focus.
Allows you to set the tape length depending on the tape used (
Z
pg. 12).
This camcorder’s Automatic Color Temperature system senses
the color temperature of the ambient lighting for automatic
white balance adjustment. However, precise color adjustment is
not possible under the following conditions:
• When an object is in various shades of the same color.
• When a predominantly red or brown object is being shot
outdoors.
In these cases, use the camcorder’s built-in preset filters for
white balance adjustment (
Z
pg. 33).
Allows you to set the zooming speed (
Z
pg. 20).
This feature allows you to set the parameters for Animation and Time-Lapse
recording (
Z
pg. 35).
This feature allows you to set the parameters for Self-Timer (
Z
pg. 34) and Time-
Lapse recording (
Z
pg. 35).
The tally lamp comes on to signal the start of recording.
The tally lamp remains off at all times.
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
of Instant Titles (
Z
pg. 27).
This number is necessary when connecting the camcorder to a device such as a
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory
setting is 07.
Automatic demonstration will not take place.
Demonstrates certain functions such as the Fader, Instant Titles
etc. When “DEMO MODE” is set to “ON” and the Menu Screen
is closed, demonstration starts.
NOTES:
●
When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
●
By turning off the camcorder or inserting a tape whose Erase
Protection tab is in the position that allows recording into it,
“DEMO MODE” is set to “OFF” automatically.
●
During demonstration, all functions except zoom are disabled.
= Factory setting and when the Select Dial is set to AUTO LOCK
EXPOSURE
DATE/TIME
TAPE LENGTH
M.W.B.
REC TIME
INT. TIME
JLIP ID NO.
DEMO MODE
TELE MACRO
AUTO
MANU
AUTO
MANU
OFF
ON
AUTO
: FINE
: CLOUD
: HALOGEN
MWB
FAST
SLOW
ZOOM SPEED
TALLY LAMP
TITLE LANG.
ON
OFF
OFF
ON
FOCUS
