EN
43
INDEX
1MIN
1 2S
15
°
5m (16.4ft)
15
°
30
°
30
°
FEATURE:
Self-Timer, Animation and Time-Lapse
PURPOSE:
The remote control lets you set/release
Interval Timer and Rec Time functions
as well as the Menu Screen.
OPERATION:
Self-Timer
1) Set
Instead of performing steps
1
through
4
on pg. 34 (“Self-Timer”), press
INT.
TIME
on the remote control. Each
time
INT. TIME
is pressed, the
Interval Timer indicator appears,
changing in the following order: 15S,
30S, 1MIN, 5MIN and No indication
(off).
2) Release
Instead of setting “INT. TIME” to
“OFF” in the Menu, press
INT. TIME
on the remote control until the
Interval Timer indicator disappears.
Animation
1) Set
Instead of performing steps
1
and
2
on pg. 35 (“Animation”), press
REC
TIME
on the remote control. Each
time
REC TIME
is pressed, the Rec
Time indicator appears, changing in
the following order: 1/4S, 1/2S, 1S,
5S and No indication (off).
2) Release
Instead of using the Menu in step
5
on pg. 35, press
REC TIME
on the
remote control until the Rec Time
indicator disappears.
Time-Lapse
1) Set
Instead of performing steps
1
through
3
on pg. 35 (“Time-Lapse”), press
INT. TIME
and
REC TIME
on the
remote control. Each time
INT. TIME
is pressed, the Interval Timer
indicator appears, changing in the
following order: 15S, 30S, 1MIN,
5MIN and No indication (off). Each
time
REC TIME
is pressed, the Rec
Time indicator appears, changing in
the following order: 1/4S, 1/2S, 1S,
5S and No indication (off).
2) Release
Instead of using the Menu in step
5
on pg. 35, press
INT. TIME
and
REC
TIME
on the remote control until the
indicators disappear.
NOTE:
Also refer to pgs. 34 and 35.
FEATURE:
Index Code Marking (RM-V700U only)
PURPOSE:
To give you automatic access to any
selected point on a recording.
OPERATION:
1)
Press
VISS
once to place the index
code. “INDEX” blinks during
marking.
NOTE:
If
VISS
is pressed during Record-
Standby mode, the mark is placed
where
START/STOP
is pressed.
When using the remote control, be sure to
point it at the remote sensor. The above
illustration shows the approximate transmitted
beam effective area for indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or
when the remote sensor is directly exposed to
sunlight or powerful lighting.
INT. TIME
REC TIME
START/STOP
VISS
RM-V705U
(provided)
RM-V700U
(optional)
OR
Interval Timer Indicator
Rec Time Indicator
Transmitted beam
effective area
Remote sensor
LCD monitor
or viewfinder
Index Code
Marking
