!
!
!
!
EN
EN
EN
EN
Master Page: Left
To Print By Selecting Still Images And Number
Of Prints
1
Perform steps
1
–
8
2
Press + or – to select
“CURRENT”, and press
SELECT/SET
. The DPOF
screen appears.
3
Press
REW (
3
)
or
FF
(
5
)
to select the desired
file.
4
Press + or – to select the number indication (00),
and press
SELECT/SET
.
5
Select the number of prints
by pr to increase
number, or – to decrease
the number, and press
SELECT/SET
.
●
Repeat steps
3
through
5
for the desired number
of prints.
●
The number of prints can be set up to 15.
●
To correct the number of prints, select the
image again and change the number.
6
Press + or – to select
“RETURN”, and press
SELECT/SET
. The “SAVE?”
appears.
●
If you did not change
any settings in step
3
through
5
, the Menu
Screen reappears.
7
Press + or – to select “EXECUTE” to save the
setting you have just made, and press
SELECT/
SET
.
●
To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps
1
–
8
2
Press + or – to select “RESET”, and press
SELECT/
SET
. The DPOF screen appears.
3
Press + or – to select “EXECUTE”, and press
SELECT/SET
. The normal playback screen
appears.
●
To cancel selection, select “RETURN”.
●
The number of prints is reset to 0 for all still
images.
You can initialize a memory card anytime.
After initializing, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1
Set the
VIDEO/MEMORY
Switch to “MEMORY”.
2
Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Press
MENU
. The Menu
Screen appears.
5
Press + or – to select
“FORMAT”, and press
SELECT/SET
. The FORMAT
screen appears.
6
Press + or – to select
“EXECUTE”, and press
SELECT/SET
. The memory
card is initialized.
●
When initialization is finished, “NO IMAGES
STORED” or “NO E-MAIL CLIP STORED”
appears.
●
To cancel initialization, select “RETURN”.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
RETURN
SHEETS
DPOF
0 0
SHEETS
DPOF
0 5
DPOF
EXECUTE
SAVE?
CANCEL
Initializing A Memory Card
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialization.
Also, be sure to use the provided AC Adapter, as
the memory card may be corrupted if the battery
becomes exhausted during initialization. If the
memory card becomes corrupted initialize it.
MENU
D I SPLAY
END
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
ORMAT
F
EXECUTE
DATA?
EX I ST I NG
ERASE AL L
RETURN
GR-D200US.book Page 30 Friday, April 11, 2003 1:05 PM
