EN
15
GETTING STARTED
MasterPage: Start_Right
1
Set the Power Switch to “
A
” or “
M
” while
pressing down the Lock Button located on the
switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
1
Set the Power Switch
to “
M
” or “PLAY” while
pressing down the Lock
Button located on the
switch.
2
Open the LCD monitor
fully. (
●
To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
“PRIORITY” to “FINDER”
(
3
Press
MENU
. The
Menu Screen appears.
4
Press
+
or
–
to select “
n
”, and press
MENU
.
The CAMERA DISPLAY or VIDEO DISPLAY
Menu appears.
5
Press
+
or
–
to select “BRIGHT”, and press
MENU
. The Menu Screen closes and the
brightness control indicator appears.
6
Press
+
or
–
until the appropriate brightness
is reached.
7
Press
MENU
to clear the brightness control
indicator from the display.
To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
●
Some tripods are not
equipped with studs.
Viewfinder Adjustment
PAUSE
Dioptre Adjustment Control
Example:
Brightness Adjustment Of The
Display
Tripod Mounting
BRIGHT
MENU
–
+
GR-D244US.book Page 15 Tuesday, May 31, 2005 2:37 PM