EN
65
2
1
USER MAINTENANCE
2
3
1
Cassette holder
cover
OPEN/EJECT Switch
PUSH HERE
Cassette
holder
Hatch
Cleaning The Camcorder
1
To clean the exterior, wipe gently with a soft
cloth.
Put the cloth in diluted mild soap and wring it
well to wipe off heavy dirt. Then wipe again
with a dry cloth.
2
Press
PUSH OPEN
and open the LCD monitor.
Wipe gently with a soft cloth. Be careful not to
damage the monitor. Close the LCD monitor.
3
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
4
To clean the viewfinder, raise it to the vertical
position. Open the viewfinder cleaning hatch in
the direction of the arrow
1
.
5
Insert a lens blower or soft cloth into the gap at
the bottom of the viewfinder and clean the
interior of the viewfinder with it
2
.
6
Close the hatch. Tilt the viewfinder back to the
horizontal position.
NOTES:
●
Avoid using strong cleaning agents such as benzine
or alcohol.
●
Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
●
Mould may form if the lens is left dirty.
●
When using a cleaner or chemically treated cloth
refer to the cautions of each product.
After Use
1
Turn off the camcorder.
2
Slide and hold
OPEN/EJECT
in the direction of
the arrow, then pull the cassette holder cover
open until it locks. The cassette holder opens
automatically. Remove the cassette.
3
Press “PUSH HERE” to close the cassette holder.
•Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
4
Tilt the viewfinder upward
1
. Slide
BAT.
RELEASE
2
and remove the battery pack
3
.
BAT. RELEASE Switch
Remove.
Lens blower
