EN
55
MAKE CONNECTIONS
Also refer to pg. 42 and 43.
1
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a remote
pause connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control’s PAUSE IN connector.
2
Insert a recorded tape into the camcorder. Set the
VIDEO/DSC
Switch to “VIDEO”, then set the Power
Switch to “
” while pressing down the Lock
Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s instructions).
NOTES:
●
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “ON” or “OFF” in the Menu
Screen (
pg. 34).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (
pg. 34).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the
Menu Screen (
pg. 34). Or, press
DISPLAY
on the
remote control.
●
Use the provided cables, making sure to connect the
end with a core filter to the camcorder. The core filter
reduces interference.
●
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable.
Consult the JVC Service Center described on the sheet
included in the package for details on its availability.
Make sure to connect the end with a core filter to the
camcorder. The core filter reduces interference.
●
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
CONTINUED ON NEXT PAGE
*
Connect when an S-Video cable is not used.
**
When connecting cables, open this cover.
ATTENTION FOR EDITING CABLE
Make sure you connect the end with the
core filter (plug which has 3 rings around
the pin) to the camcorder.
DISPLAY
To Remote
PAUSE or
R.A.EDIT
VCR
TV
White to
AUDIO L IN
Red to
AUDIO R IN
To
S-VIDEO IN
To PAUSE IN
Editing
cable
(provided)
S-Video cable
(optional)
Audio/Video
cable
(provided)
Yellow to
VIDEO IN*
Connector
cover**
To AV
To JLIP/
EDIT
To S
Core
filter
Core
filter
Core filter
