Master Page: Right
— 8 —
NOTES:
●
The software instruction manual is included on the CD-ROM in PDF format. Double-click the [Docs]
folder. Open the “Start.pdf” file and click the button of the desired language. Note that Adobe
®
Acrobat
®
Reader
TM
or Adobe
®
Reader
®
must be installed to read PDF files.
●
Adobe
®
Acrobat
®
Reader
TM
or Adobe
®
Reader
®
can be loaded from Adobe’s web site:
http://www.adobe.com/
●
For details on how to use
Windows
®
Messenger
(Windows
®
XP only), refer to “VIDEO CONFERENCE OVER
THE INTERNET” in the software instruction manual on the CD-ROM.
●
If you perform installation of a software that is already installed, uninstallation will start. In this case,
perform the installation again after uninstallation is finished.
●
DirectX is necessary so that ImageMixer 2.0 works properly.
If the camcorder is connected to the PC with the USB cable before installing [USB Mass Storage Class driver],
the installation might not be performed properly.
In this case, follow the procedure described below to update the [Device Manager] and install [USB Mass
Storage Class driver] properly.
NOTE:
Disconnect any other USB audio devices from PC before performing the following procedure.
Installing [USB Mass Storage Class driver]
1
Use the USB cable to connect the camcorder to the PC. (
2
Click [Start], go to [Settings], and then click [Control Panel]. Double click the [System]
icon.
3
Select the [Device Manager] tab.
4
Delete [GR-DZ7*] in [Other devices].
* The model name depends on the connected camcorder.
5
Disconnect the USB cable from the camcorder. Restart the PC.
6
Load the provided CD-ROM into the PC. Install [USB Mass Storage Class driver]. (
7
Use the USB cable to connect the camcorder to the PC.
Device driver is installed.
8
Confirm the [Removable Disk] icon is displayed in [My Computer].
Updating [Device Manager] (Windows
®
98/98SE only)
M4D6+DSC_InstaGuide.fm Page 8 Wednesday, May 12, 2004 3:05 PM
