12
EN
Recording Mode Setting
Set depending on your preference.
1
Set the Power Switch to “AUTO” or “PRO.”. Press SP/
EP for more than 1 second. “SP” (Standard Play)
provides higher picture and sound quality and is better
for dubbing, while “EP” (Extended Play) is more
economical, providing three times the recording time.
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
GETTING STARTED
(cont.)
SP
T 3 0
T
T
4
E
A
R
L
P
E
E
E
TU
M
L
R
A
E
N
C
N
R
G
O
TH
O
T
F
3
F
0
T
T
T
T
E
2
3
3
4
X
0
0
5
0
I T
TAPE LENGTH
T
T
4
E
A
R
L
P
E
E
E
TU
M
L
R
A
E
N
C
N
R
G
O
TH
O
T
F
4
F
0
Recording mode
indicator
Tape length indicator
TAPE LENGTH
Setting Menu
Select Wheel
Power Switch
MENU Button
SP/EP Recording
Mode Button
Viewfinder
Tape Length Setting
Set the tape length according to the length of the tape
used.
1
Set the Power Switch to “PRO.”, then press MENU.
2
Rotate the Select Wheel to move the highlight bar to
“TAPE LENGTH”, then press it. The TAPE LENGTH
Setting Menu appears.
3
Rotate the Select Wheel to move the highlight bar to
the correct tape length setting. T20=20 minutes of
recording time, T30=30 minutes, T35=35 minutes,
and T40=40 minutes (in SP).
•To return to the previous setting, rotate the Select
Wheel to move the highlight bar to “EXIT”.
4
Press the Select Wheel. The Menu Screen reappears
with the highlight bar on “RETURN”. Press the Select
Wheel again to close the Menu Screen.
NOTE:
The tape remaining time (
Z
pg. 16) displayed in the
viewfinder is correct only if the correct tape length has
been selected.
Menu Screen
Display
