background image

11

BASIC FEATURES

• Manual Tracking may not work with tapes

recorded on other VCRs or camcorders.

Removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes. 
To activate/release the TBC mode, press TBC 

4

during playback for more than 1 second. “TBC” 

5

is displayed.
• The “TBC” indicator 

5

 turns green (grey with a

camcorder equipped with a black/white
viewfinder) while TBC is working, and white
while TBC is not operative.

• TBC does not work during Still Playback and

Shuttle Search (

 

pg. 9).

• It may take a few seconds before TBC actually

starts working.

• The picture may be distorted if the TBC mode

is activated or deactivated at the edit-in/-out
points or when normal playback resumes after
Still Playback or Shuttle Search (

 

pg. 9).

• If the playback picture is distorted when TBC is

set to on, turn off TBC.

1) Make sure all units are turned off.
2) Connect the camcorder to a TV or VCR. If

using both TV and VCR, connect the VCR
output to the TV input.

3) Turn on all units. Set the VCR to its AUX input

mode, and set the TV to its VIDEO mode.

• Use the AC Adapter as the power supply.
• The S-Video cable connection can improve the

dubbed picture quality. The S-Video cable is
optional. Be sure to use the following cable:
YTU94146A S-Video cable.
Consult the JVC Service Center described on
the sheet included in the package for details on
its availability. Make sure to connect the end
with a core filter to the camcorder. The core
filter reduces interference.

• Be sure to lower the TV volume to its minimum

to avoid a sudden burst of sound when the
camcorder is turned on.

• If you have a TV or speakers that are not

specially shielded, do not place the speakers
adjacent to the TV as interference will occur in
the camcorder playback picture.

1) Connect the camcorder and the VCR (

 

pg.

11,  “Connections To A TV/VCR”). Set the
Power Switch 

$

 to “PLAY” while pressing

down the Lock Button 

#

, turn on the VCR’s

power, and insert the appropriate cassettes in
the camcorder and the VCR.

• Engage the VCR’s AUX and Record-Pause

modes.

2) Press 

3

/

8

 

(

 to find a spot just before the edit-

in point. Once it is reached, press 

3

/

8

 

(

again.

TBC (Time Base Corrector)

Connections To  A TV/VCR

Tape Dubbing

TV

VCR

To S-Video 
Output 

6

6

6

6

White to Audio 
Output 

7

7

7

7

Yellow to Video 
Output 

8

8

8

8

S-Video
cable
(Optional)

A/V cable
(Optional)

To S-Video 
Input

White to 
Audio Input

Yellow to 
Video Input

Connector 
Cover

GR-SXM38-EN.fm  Page 11  Friday, December 23, 2005  11:43 AM

Summary of Contents for GR-SXM38U

























Reviews: