background image

17

Video Light

When natural lighting is too dim, you can brighten the
scene by using the built-in video light.

SET VIDEO LIGHT

1

Set the LIGHT OFF/AUTO/ON as required.
ON

: Always keeps the light on as long as the

camcorder is turned on.

AUTO : Automatically turns on the light when the

camcorder senses insufficient lighting on
the subject.

OFF

: Turns off the light.

•The video light can be used with the camcorder’s

power on.

•It is recommended to set the white balance

(

Z

 pg. 27) to indoor mode ( ) when you use the

video light.

•When not using the video light, turn it off to save

battery power.

NOTES:

Even if the battery indicator (

) does not blink in the

viewfinder, if the battery pack’s charge is low, the
camcorder may turn off automatically when you turn
on the video light, or when you start recording with the
video light turned on.

When the LIGHT OFF/AUTO/ON switch is set to
“AUTO”:

Depending on the lighting conditions, the video light
may keep turning on and off. In this case, manually
switch the light on or off using the LIGHT OFF/
AUTO/ON
 switch.

While the Sports or High-Speed Shutter mode
(

Z

 

pg. 19) is engaged, the light is likely to stay on.

While the Twilight mode (

Z

 

pg. 19) is engaged, the

light will not activate.

DANGER

•The video light become extremely hot. Do not

touch it either while in operation or soon after
turning it off, otherwise serious injury may result.

•Do not place the camcorder into the carrying case

immediately after using the video light, since it
remains extremely hot.

•When operating, keep a distance of about 30 cm.

(1 ft.) between the video light and people or
objects.

•Do not use near flammable or explosive materials.
•It is recommended that you consult your nearest

JVC dealer for replacing the video light.

LIGHT OFF/AUTO/ON

Summary of Contents for GR-SZ5000

























































Reviews: